Elevating Screw and Stage
AssemblyRaises the specimen against the indenter to seat the minor load. A handwheel or motorized ball screw drives the stage, and interchangeable anvils support flat, round and small parts. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Elevating Screw and Stage
9 top-level lines as of r79879| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Elevating Screw | hardness-tester-rockwell-elevating-screw | 1× | 1 | · | part |
| 2 | Elevating Handwheel | hardness-tester-rockwell-handwheel | 1× | 1 | · | part |
| 3 | Stage Table | hardness-tester-rockwell-stage-table | 1× | 1 | · | part |
| 4 | Flat Anvil | hardness-tester-rockwell-anvil-flat | 1× | 1 | · | part |
| 5 | V Anvil | hardness-tester-rockwell-anvil-v | 1× | 1 | · | part |
| 6 | Spot Anvil | hardness-tester-rockwell-anvil-spot | 1× | 1 | · | part |
| 7 | Specimen Clamp | hardness-tester-rockwell-specimen-clamp | 1× | 1 | · | part |
| 8 | Screw Bellows | hardness-tester-rockwell-screw-bellows | 1× | 1 | · | part |
| 9 | Ball Bearing | ball-bearing | 1× | 1 | · | part |