BOMwiki the bill-of-materials encyclopedia
30,443,794 parts mapped · 193,030 items

You are viewing r193824 of this page, not the current version. Go to current · history

Powder Preparation and Shaping

Assembly

Precursor powders are weighed on the analytical balance, ground in an agate mortar or the planetary mill and pressed into pellets in a die under the hydraulic press. After firing, the diamond saw and silicon carbide paper shape pellets into flat bars, and the caliper gives the dimensions for resistivity. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.

Bill of materials for Powder Preparation and Shaping

16 top-level lines as of r193824
# Item / sub-assembly Part no. Qty/assy Ext. qty Parts Type
1 Analytical Balance 12 parts analytical-balance 1× 1 0 product
2 Weighing Paper weighing-paper 2× 2 · part
3 Micro Spatulas micro-spatulas 2× 2 · part
4 Agate Mortar and Pestle agate-mortar-and-pestle 2× 2 · part
5 Planetary Ball Mill planetary-ball-mill 1× 1 · part
6 Milling Jars milling-jars 2× 2 · part
7 Milling Media milling-media 2× 2 · part
8 Test Sieves test-sieves 1× 1 · part
9 Hydraulic Pellet Press hydraulic-pellet-press 1× 1 · part
10 Pellet Die Sets pellet-die-sets 2× 2 · part
11 Low-Speed Diamond Saw low-speed-diamond-saw 1× 1 · part
12 Diamond Wafering Blade diamond-wafering-blade 2× 2 · part
13 Mounting Wax mounting-wax 1× 1 · part
14 Saw Cutting Fluid saw-cutting-fluid 1× 1 · part
15 Silicon Carbide Abrasive Paper silicon-carbide-abrasive-paper 3× 3 · part
16 Digital Caliper digital-caliper 1× 1 · part