BOMwiki the bill-of-materials encyclopedia
30,454,201 parts mapped · 193,225 items

You are viewing r91688 of this page, not the current version. Go to current · history

Isolation Transformer

Product

Overview

An isolation transformer has a one-to-one turns ratio and exists not to change voltage but to break the metallic connection between two circuits. Power crosses from primary to secondary entirely through the magnetic field, so there is no conductive path between input and output. That galvanic separation does several jobs at once: it lets a secondary circuit be earthed independently of the supply, it stops earth-loop and leakage currents from flowing between equipment, and, when fitted with an electrostatic shield, it strongly attenuates the high-frequency common-mode noise that rides on a mains supply. Ratings span from small bench units under a kilovolt-ampere up to several hundred kilovolt-amperes for hospital theatres, broadcast facilities, and industrial drives.

The defining electrical features are the unity ratio, the inter-winding insulation rated well above the working voltage, and the earthed Faraday shield between the windings. A plain transformer already isolates, but capacitance between the primary and secondary windings still couples noise across; the shield intercepts that capacitive current and drains it to earth, which is why a shielded isolation transformer can deliver common-mode attenuation of 60 to 120 decibels.

Core and windings

The Magnetic Core is a stacked three-limb design (or a toroid on small units) of grain-oriented silicon-steel laminations chosen for low no-load loss and low magnetising current, since an isolation transformer is often energised continuously at light load. The stack is held by a clamping frame and, on dry types, by glass banding rather than through-bolts so no shorted turn is formed. The primary and secondary each carry the same number of turns on the coil former; the matched turns give the unity ratio. Inter-layer insulation separates the winding layers, and coil spacers form the cooling channels.

Electrostatic shield

The electrostatic shield is what separates an isolation transformer from an ordinary one. A single-turn copper foil is wound between the primary and secondary, insulated from both by shield insulation so it carries no power current, and bonded to earth through a low-impedance shield lead. Noise current that would otherwise couple capacitively from primary to secondary instead flows into the shield and back to earth, which is why the quality of the earth connection sets the noise performance. The foil is overlapped but not closed into a full turn, so it does not act as a shorted secondary.

Insulation and isolation rating

The insulation system is sized for the isolation withstand voltage, not just the working voltage. The inter-winding barrier sets the primary-to-secondary withstand, typically tested at 2.5 to 4 kV, and end insulation separates the windings from the core and clamps. Dry-type units are vacuum-pressure impregnated with Class H varnish that fills air voids, raising both dielectric strength and resistance to vibration and humidity. Oil-immersed isolation transformers use mineral oil and pressboard instead, following IEC 60076-11 for dry types or IEC 60076 for liquid types.

Enclosure, taps and protection

The active part sits in a ventilated or sealed enclosure. Small units cool by natural convection through louvers; larger ones add a cooling fan. No-load tap links let an installer trim the ratio for a consistently high or low supply. The terminal set lands the input and output cables with an earth terminal that bonds the enclosure, core, and shield. Protection includes a thermal cutout and temperature sensors for the winding, fuses on each side, and, for unearthed (IT) secondaries, a line insulation monitor that flags the first earth fault before a second fault can become dangerous.

Variants, standards and use

Common variants are the medical isolation transformer to IEC 60601-1, with very low leakage current and an insulation monitor for the IT power system that keeps a single fault in an operating theatre from cutting power; the ultra-isolation transformer with multiple or box shields for the highest common-mode rejection in laboratory and audio work; and the marine isolation transformer that breaks the shore-power earth path to stop galvanic corrosion of a vessel's hull. General-purpose units follow IEC 61558-2-4 and UL 1561. Beyond noise and safety, isolation transformers let sensitive equipment, medical, broadcast, instrumentation, variable-speed drives, run on a separately derived and independently earthed source, which is often a code requirement rather than a preference. Because the secondary floats with respect to the supply, a single accidental contact between one output conductor and earth does not complete a circuit, which is the core safety benefit the device is bought for.

Bill of materials for Isolation Transformer

9 top-level lines as of r91688
# Item / sub-assembly Part no. Qty/assy Ext. qty Parts Type
1 Magnetic Core 6 parts isolation-transformer-core 1× 1 0 assembly
2 Primary Winding 5 parts isolation-transformer-primary-winding 1× 1 0 assembly
3 Secondary Winding 5 parts isolation-transformer-secondary-winding 1× 1 0 assembly
4 Electrostatic Shield 3 parts isolation-transformer-shield 1× 1 0 assembly
5 Insulation System 4 parts isolation-transformer-insulation 1× 1 0 assembly
6 Enclosure and Cooling 7 parts isolation-transformer-enclosure 1× 1 0 assembly
7 No-Load Tap Links 2 parts isolation-transformer-taps 1× 1 0 assembly
8 Terminal and Connection Set 5 parts isolation-transformer-terminals 1× 1 0 assembly
9 Protection and Monitoring 5 parts isolation-transformer-protection 1× 1 0 assembly

876-word article