General Bench
AssemblyHeating, drying, cleaning and storage, with the hand tools and soldering gear for wiring samples. The drying oven and vacuum desiccators keep water out of the precursor powders, and the notebook and label printer keep each sample traceable. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
General Bench parts and their functions
15 top-level parts · 274 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Magnetic Stirrer 8 parts | 1× | Heats and stirs solutions for wet-chemical precursor routes such as nitrate or citrate gels and dries small batches of slurry after wet grinding. Useful |
| 2 | Drying Oven | 1× | Dries precursor powders before weighing, and dries glassware and pressed pellets, so absorbed water does not shift the stoichiometry. Core |
| 3 | Vacuum Desiccator | 2× | Stores dried precursors, hygroscopic oxides and finished samples under vacuum or over desiccant so they take up no water or carbon dioxide. Core |
| 4 | Indicating Desiccant | 2× | Takes up water vapor inside the desiccators and changes color when it is spent and needs drying out in the oven. Core, 1 lb |
| 5 | Ultrasonic Cleaner 7 parts | 1× | Cleans dies, crucibles, tweezers and sample holders in water or in a solvent-filled beaker, and breaks up powder agglomerates before inspection. Useful |
| 6 | Lab Water Purification System 8 parts | 1× | Supplies low-ion water for rinsing glassware and tooling and for making precursor solutions without adding sodium, calcium or chloride. Useful |
| 7 | Borosilicate Beakers | 2× | Holds precursor solutions, rinse baths and powders during weighing, mixing and cleaning. Core, set |
| 8 | Wash Bottles | 6× | Dispenses deionized water, ethanol, isopropanol and acetone for rinsing mortars, dies and glassware. Core |
| 9 | Lint-Free Wipes | 1× | Wipes mortars, dies, spatulas, tweezers and sample holders with solvent between batches without leaving fibers. Core, pack of 12 boxes |
| 10 | Tweezers and Hand Tools | 1× | Handles pellets, wires, foils and small samples, and drives the fasteners used to assemble probes, dies and fixtures. Core, set |
| 11 | Soldering Station 8 parts | 1× | Solders the wiring, connectors and sample-holder leads used for four-probe resistance and susceptibility coil measurements. Core |
| 12 | Solder Wire | 1× | Joins probe wiring, connectors and coil leads away from the sample's voltage path, because tin-lead solder superconducts below about 7 K. Core, 100 g |
| 13 | Digital Multimeter 9 parts | 1× | Checks continuity and two-wire contact resistance on sample wiring, thermocouples and heater leads before a cooldown or a furnace run. Core |
| 14 | Handheld Label Maker 11 parts | 1× | Prints labels for sample vials, bags, crucible trays and reagent containers so each sample keeps its identifier through firing and measurement. Useful |
| 15 | Lab Notebook | 3× | Records each batch's masses, firing schedule, sample identifier and measurement files so a result can be traced and repeated. Core |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for General Bench
15 top-level lines · 245 rows shown · 274 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Magnetic Stirrer 8 parts | magnetic-stirrer | 1× | 1 | 70 | product |
| 1.1 | Chassis 4 parts | magnetic-stirrer-chassis | 1× | 1 | 7 | assembly |
| 1.1.1 | Base Casting | magnetic-stirrer-base-casting | 1× | 1 | · | part |
| 1.1.2 | Housing Shell | magnetic-stirrer-housing-shell | 1× | 1 | · | part |
| 1.1.3 | Rubber Foot | magnetic-stirrer-foot | 4× | 4 | · | part |
| 1.1.4 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 1.2 | Top Plate 3 parts | magnetic-stirrer-top-plate | 1× | 1 | 3 | assembly |
| 1.2.1 | Aluminium Plate | magnetic-stirrer-plate-aluminium | 1× | 1 | · | part |
| 1.2.2 | Ceramic Coating | magnetic-stirrer-plate-ceramic | 1× | 1 | · | part |
| 1.2.3 | Plate Gasket | magnetic-stirrer-plate-gasket | 1× | 1 | · | part |
| 1.3 | Stirring Drive 7 parts | magnetic-stirrer-drive | 1× | 1 | 30 | assembly |
| 1.3.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 1 | 3 | assembly |
| 1.3.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 1 | 19 | assembly |
| 1.3.3 | Motor Housing | motor-housing | 1× | 1 | · | part |
| 1.3.4 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 1.3.5 | Drive Magnet Bar 2 parts + deeper › | magnetic-stirrer-magnet-bar | 1× | 1 | 3 | assembly |
| 1.3.6 | Hall Sensor | magnetic-stirrer-hall-sensor | 1× | 1 | · | part |
| 1.3.7 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 1.4 | Heater Assembly 5 parts | magnetic-stirrer-heater-assembly | 1× | 1 | 5 | assembly |
| 1.4.1 | Heating Element | heating-element | 1× | 1 | · | part |
| 1.4.2 | PT100 Sensor | magnetic-stirrer-pt100 | 1× | 1 | · | part |
| 1.4.3 | Thermal Fuse | thermal-fuse | 1× | 1 | · | part |
| 1.4.4 | Over-Temp Limiter | magnetic-stirrer-overtemp-switch | 1× | 1 | · | part |
| 1.4.5 | Probe Jack | magnetic-stirrer-probe-jack | 1× | 1 | · | part |
| 1.5 | Control Board 6 parts | magnetic-stirrer-control-board | 1× | 1 | 11 | assembly |
| 1.5.1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 1.5.2 | Microcontroller | mcu | 1× | 1 | · | part |
| 1.5.3 | Motor Driver | magnetic-stirrer-motor-driver | 1× | 1 | · | part |
| 1.5.4 | Heater Control | magnetic-stirrer-heater-control | 1× | 1 | · | part |
| 1.5.5 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 1.5.6 | Connector | connector | 6× | 6 | · | part |
| 1.6 | Display Panel 4 parts | magnetic-stirrer-display-panel | 1× | 1 | 5 | assembly |
| 1.6.1 | LCD Panel | lcd-panel | 1× | 1 | · | part |
| 1.6.2 | Control Knob | magnetic-stirrer-knob | 2× | 2 | · | part |
| 1.6.3 | Button Pad | magnetic-stirrer-button | 1× | 1 | · | part |
| 1.6.4 | Connector | connector | 1× | 1 | · | part |
| 1.7 | Stir Bar Set 2 parts | magnetic-stirrer-stir-bar-set | 1× | 1 | 4 | assembly |
| 1.7.1 | PTFE Stir Bar | magnetic-stirrer-stir-bar | 3× | 3 | · | part |
| 1.7.2 | Stir Bar Retriever | magnetic-stirrer-retriever | 1× | 1 | · | part |
| 1.8 | Power Input 4 parts | magnetic-stirrer-power-input | 1× | 1 | 5 | assembly |
| 1.8.1 | Power Cord | magnetic-stirrer-power-cord | 1× | 1 | · | part |
| 1.8.2 | Power Inlet | magnetic-stirrer-inlet | 1× | 1 | · | part |
| 1.8.3 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 1.8.4 | Connector | connector | 2× | 2 | · | part |
| 2 | Drying Oven | drying-oven | 1× | 1 | · | part |
| 3 | Vacuum Desiccator | vacuum-desiccator | 2× | 2 | · | part |
| 4 | Indicating Desiccant | indicating-desiccant | 2× | 2 | · | part |
| 5 | Ultrasonic Cleaner 7 parts | ultrasonic-cleaner | 1× | 1 | 37 | product |
| 5.1 | Ultrasonic Tank 5 parts | ultrasonic-cleaner-tank | 1× | 1 | 5 | assembly |
| 5.1.1 | Tank Body | ultrasonic-cleaner-tank-body | 1× | 1 | · | part |
| 5.1.2 | Tank Lid | ultrasonic-cleaner-tank-lid | 1× | 1 | · | part |
| 5.1.3 | Drain Valve | ultrasonic-cleaner-tank-drain | 1× | 1 | · | part |
| 5.1.4 | Mesh Basket | ultrasonic-cleaner-basket | 1× | 1 | · | part |
| 5.1.5 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 5.2 | Piezoelectric Transducer Array 4 parts | ultrasonic-cleaner-transducer-array | 1× | 1 | 7 | assembly |
| 5.2.1 | Piezo Transducer | ultrasonic-cleaner-piezo-transducer | 4× | 4 | · | part |
| 5.2.2 | Transducer Coupling Adhesive | ultrasonic-cleaner-coupling-adhesive | 1× | 1 | · | part |
| 5.2.3 | Resonance Backing Plate | ultrasonic-cleaner-resonance-plate | 1× | 1 | · | part |
| 5.2.4 | Connector | connector | 1× | 1 | · | part |
| 5.3 | Ultrasonic Frequency Generator 6 parts | ultrasonic-cleaner-generator | 1× | 1 | 7 | assembly |
| 5.3.1 | Oscillator IC | ultrasonic-cleaner-oscillator-ic | 1× | 1 | · | part |
| 5.3.2 | Power Amplifier | ultrasonic-cleaner-power-amp | 1× | 1 | · | part |
| 5.3.3 | Tuning Inductor | ultrasonic-cleaner-inductor | 1× | 1 | · | part |
| 5.3.4 | SMD Passive (R/C/L) | smd-passives | 2× | 2 | · | part |
| 5.3.5 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 5.3.6 | Connector | connector | 1× | 1 | · | part |
| 5.4 | Solution Heating System 5 parts | ultrasonic-cleaner-heating-system | 1× | 1 | 5 | assembly |
| 5.4.1 | Heating Element | heating-element | 1× | 1 | · | part |
| 5.4.2 | Heater Sheath Tube | ultrasonic-cleaner-heater-tube | 1× | 1 | · | part |
| 5.4.3 | Temperature Sensor | ultrasonic-cleaner-temp-sensor | 1× | 1 | · | part |
| 5.4.4 | Relay | relay | 1× | 1 | · | part |
| 5.4.5 | Thermal Fuse | thermal-fuse | 1× | 1 | · | part |
| 5.5 | Control Panel & Interface 6 parts | ultrasonic-cleaner-control-unit | 1× | 1 | 6 | assembly |
| 5.5.1 | Power Switch | ultrasonic-cleaner-on-off-switch | 1× | 1 | · | part |
| 5.5.2 | Frequency Selector | ultrasonic-cleaner-frequency-dial | 1× | 1 | · | part |
| 5.5.3 | Temperature Setpoint Dial | ultrasonic-cleaner-temp-dial | 1× | 1 | · | part |
| 5.5.4 | LCD Display Panel | ultrasonic-cleaner-lcd-display | 1× | 1 | · | part |
| 5.5.5 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 5.5.6 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 5.6 | Cleaning Cycle Timer 3 parts | ultrasonic-cleaner-timer | 1× | 1 | 3 | assembly |
| 5.6.1 | Timer Switch | ultrasonic-cleaner-timer-switch | 1× | 1 | · | part |
| 5.6.2 | Timer Dial Knob | ultrasonic-cleaner-timer-dial | 1× | 1 | · | part |
| 5.6.3 | Cycle Active Indicator | ultrasonic-cleaner-cycle-light | 1× | 1 | · | part |
| 5.7 | Power Supply & Distribution 4 parts | ultrasonic-cleaner-power-supply | 1× | 1 | 4 | assembly |
| 5.7.1 | Power Supply | power-supply | 1× | 1 | · | part |
| 5.7.2 | Power Cord | ultrasonic-cleaner-power-cord | 1× | 1 | · | part |
| 5.7.3 | Fuse Holder | ultrasonic-cleaner-fuse-holder | 1× | 1 | · | part |
| 5.7.4 | Power Connector Plug | ultrasonic-cleaner-connector-plug | 1× | 1 | · | part |
| 6 | Lab Water Purification System 8 parts | lab-water-purifier | 1× | 1 | 25 | product |
| 6.1 | Pre-Filter Stage 3 parts | lab-water-purifier-prefilter | 1× | 1 | 3 | assembly |
| 6.1.1 | Sediment Filter Cartridge | lab-water-purifier-sediment-cartridge | 1× | 1 | · | part |
| 6.1.2 | Activated Carbon Cartridge | lab-water-purifier-carbon-cartridge | 1× | 1 | · | part |
| 6.1.3 | Filter Housing | lab-water-purifier-cartridge-housing | 1× | 1 | · | part |
| 6.2 | Reverse-Osmosis Module 4 parts | lab-water-purifier-ro-stage | 1× | 1 | 4 | assembly |
| 6.2.1 | RO Pump | lab-water-purifier-ro-pump | 1× | 1 | · | part |
| 6.2.2 | RO Membrane Cartridge | lab-water-purifier-ro-membrane | 1× | 1 | · | part |
| 6.2.3 | RO Membrane Housing | lab-water-purifier-ro-housing | 1× | 1 | · | part |
| 6.2.4 | RO Shut-off Valve | lab-water-purifier-ro-valve | 1× | 1 | · | part |
| 6.3 | Deionization (Ion Exchange) Stage 3 parts | lab-water-purifier-ion-exchange | 1× | 1 | 3 | assembly |
| 6.3.1 | Mixed-Bed Resin Cartridge | lab-water-purifier-mixed-resin-cartridge | 1× | 1 | · | part |
| 6.3.2 | Deionization Housing | lab-water-purifier-resin-housing | 1× | 1 | · | part |
| 6.3.3 | Resin Saturation Indicator | lab-water-purifier-resin-indicator | 1× | 1 | · | part |
| 6.4 | UV Sterilization Module 4 parts | lab-water-purifier-uv-lamp | 1× | 1 | 4 | assembly |
| 6.4.1 | UV-C Lamp | lab-water-purifier-uv-tube | 1× | 1 | · | part |
| 6.4.2 | UV Ballast | lab-water-purifier-uv-ballast | 1× | 1 | · | part |
| 6.4.3 | UV Chamber | lab-water-purifier-uv-chamber | 1× | 1 | · | part |
| 6.4.4 | UV Intensity Sensor (Optional) | lab-water-purifier-uv-sensor | 1× | 1 | · | part |
| 6.5 | Final Polishing Cartridge 2 parts | lab-water-purifier-polishing-cartridge | 1× | 1 | 2 | assembly |
| 6.5.1 | Polishing Membrane Cartridge | lab-water-purifier-polishing-membrane | 1× | 1 | · | part |
| 6.5.2 | Polishing Housing | lab-water-purifier-polishing-housing | 1× | 1 | · | part |
| 6.6 | Dispensing System 3 parts | lab-water-purifier-dispensing-system | 1× | 1 | 3 | assembly |
| 6.6.1 | Dispensing Pump (Optional) | lab-water-purifier-dispenser-pump | 1× | 1 | · | part |
| 6.6.2 | Dispenser Nozzle | lab-water-purifier-dispenser-nozzle | 1× | 1 | · | part |
| 6.6.3 | Dispensing Tubing | lab-water-purifier-flex-tubing | 1× | 1 | · | part |
| 6.7 | Storage Tank 3 parts | lab-water-purifier-storage-tank | 1× | 1 | 3 | assembly |
| 6.7.1 | Tank Vessel | lab-water-purifier-tank-vessel | 1× | 1 | · | part |
| 6.7.2 | Vent Filter | lab-water-purifier-tank-vent-filter | 1× | 1 | · | part |
| 6.7.3 | Tank Drain Valve | lab-water-purifier-tank-drain-valve | 1× | 1 | · | part |
| 6.8 | Water Quality Monitoring 3 parts | lab-water-purifier-monitoring | 1× | 1 | 3 | assembly |
| 6.8.1 | Resistivity Cell | lab-water-purifier-resistivity-sensor | 1× | 1 | · | part |
| 6.8.2 | TDS Sensor | lab-water-purifier-tds-sensor | 1× | 1 | · | part |
| 6.8.3 | Quality Display & Alarm | lab-water-purifier-display-unit | 1× | 1 | · | part |
| 7 | Borosilicate Beakers | borosilicate-beakers | 2× | 2 | · | part |
| 8 | Wash Bottles | wash-bottles | 6× | 6 | · | part |
| 9 | Lint-Free Wipes | lint-free-wipes | 1× | 1 | · | part |
| 10 | Tweezers and Hand Tools | tweezers-and-hand-tools | 1× | 1 | · | part |
| 11 | Soldering Station 8 parts | soldering-station | 1× | 1 | 37 | product |
| 11.1 | Power Supply Unit 4 parts | soldering-station-power-supply | 1× | 1 | 5 | assembly |
| 11.1.1 | Power Transformer | soldering-station-transformer | 1× | 1 | · | part |
| 11.1.2 | Rectifier Bridge | soldering-station-rectifier | 1× | 1 | · | part |
| 11.1.3 | Filter Capacitor | soldering-station-filter-cap | 2× | 2 | · | part |
| 11.1.4 | Heater Control Relay | soldering-station-heater-relay | 1× | 1 | · | part |
| 11.2 | Temperature Control Electronics 4 parts | soldering-station-temperature-control | 1× | 1 | 4 | assembly |
| 11.2.1 | Microcontroller | mcu | 1× | 1 | · | part |
| 11.2.2 | PID Controller Firmware | soldering-station-pid-controller | 1× | 1 | · | part |
| 11.2.3 | Temperature Sensor | soldering-station-temperature-sensor | 1× | 1 | · | part |
| 11.2.4 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 11.3 | Soldering Iron Hand Piece 5 parts | soldering-station-iron-assembly | 1× | 1 | 5 | assembly |
| 11.3.1 | Heating Element | soldering-station-heater-element | 1× | 1 | · | part |
| 11.3.2 | Heating Chamber | soldering-station-heating-chamber | 1× | 1 | · | part |
| 11.3.3 | Tip Mounting Seat | soldering-station-tip-seat | 1× | 1 | · | part |
| 11.3.4 | Handle Grip | soldering-station-handle-grip | 1× | 1 | · | part |
| 11.3.5 | Connector | connector | 1× | 1 | · | part |
| 11.4 | Temperature Sensor Assembly 3 parts | soldering-station-sensor | 1× | 1 | 3 | assembly |
| 11.4.1 | Thermocouple Junction | soldering-station-thermocouple | 1× | 1 | · | part |
| 11.4.2 | Sensor Sheath | soldering-station-sensor-sheath | 1× | 1 | · | part |
| 11.4.3 | Cold Junction Compensation | soldering-station-cold-junction-comp | 1× | 1 | · | part |
| 11.5 | Control and Display Panel 4 parts | soldering-station-display-panel | 1× | 1 | 7 | assembly |
| 11.5.1 | LCD Panel | lcd-panel | 1× | 1 | · | part |
| 11.5.2 | Control Buttons | soldering-station-button-array | 3× | 3 | · | part |
| 11.5.3 | Status Indicator LED | soldering-station-indicator-led | 2× | 2 | · | part |
| 11.5.4 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 11.6 | Base Station Enclosure 4 parts | soldering-station-base-unit | 1× | 1 | 5 | assembly |
| 11.6.1 | Base Station Chassis | soldering-station-chassis | 1× | 1 | · | part |
| 11.6.2 | Main Control PCB | soldering-station-pcb-main | 1× | 1 | · | part |
| 11.6.3 | Connector Panel | soldering-station-connector-panel | 1× | 1 | · | part |
| 11.6.4 | Fastener Set | fastener-set | 2× | 2 | · | part |
| 11.7 | Iron Holder and Stand 4 parts | soldering-station-iron-holder | 1× | 1 | 4 | assembly |
| 11.7.1 | Holder Pedestal | soldering-station-holder-base | 1× | 1 | · | part |
| 11.7.2 | Iron Rest Cradle | soldering-station-iron-rest | 1× | 1 | · | part |
| 11.7.3 | Sponge/Cleaner Cup | soldering-station-sponge-holder | 1× | 1 | · | part |
| 11.7.4 | Solder Spool Holder | soldering-station-solder-spindle | 1× | 1 | · | part |
| 11.8 | Iron Cord and Quick-Disconnect 3 parts | soldering-station-cord-and-connectors | 1× | 1 | 4 | assembly |
| 11.8.1 | Wire Bundle | wire-bundle | 2× | 2 | · | part |
| 11.8.2 | Connector | connector | 1× | 1 | · | part |
| 11.8.3 | Cable Strain Relief | soldering-station-strain-relief | 1× | 1 | · | part |
| 12 | Solder Wire | solder-wire | 1× | 1 | · | part |
| 13 | Digital Multimeter 9 parts | digital-multimeter | 1× | 1 | 32 | product |
| 13.1 | Plastic Enclosure 5 parts | digital-multimeter-housing | 1× | 1 | 5 | assembly |
| 13.1.1 | Front Panel | digital-multimeter-front-cover | 1× | 1 | · | part |
| 13.1.2 | Rear Cover | digital-multimeter-rear-cover | 1× | 1 | · | part |
| 13.1.3 | Protective Bumper | digital-multimeter-rubber-boot | 1× | 1 | · | part |
| 13.1.4 | Carrying Strap | digital-multimeter-handle-strap | 1× | 1 | · | part |
| 13.1.5 | Probe Pockets | digital-multimeter-probe-storage | 1× | 1 | · | part |
| 13.2 | Measurement Circuitry 4 parts | digital-multimeter-measurement-circuit | 1× | 1 | 4 | assembly |
| 13.2.1 | ADC Converter Chip | digital-multimeter-adc-ic | 1× | 1 | · | part |
| 13.2.2 | Input Preamplifier | digital-multimeter-preamp-stage | 1× | 1 | · | part |
| 13.2.3 | Ohms Measurement Stage | digital-multimeter-ohms-circuit | 1× | 1 | · | part |
| 13.2.4 | Voltage Reference | digital-multimeter-reference-voltage | 1× | 1 | · | part |
| 13.3 | Input Protection Stage 4 parts | digital-multimeter-input-protection | 1× | 1 | 4 | assembly |
| 13.3.1 | Fuses | digital-multimeter-fuse-set | 1× | 1 | · | part |
| 13.3.2 | TVS Diode Array | digital-multimeter-transient-diodes | 1× | 1 | · | part |
| 13.3.3 | Series Resistors | digital-multimeter-current-limiting-resistors | 1× | 1 | · | part |
| 13.3.4 | Overvoltage Clamp | digital-multimeter-overvoltage-suppressor | 1× | 1 | · | part |
| 13.4 | Range Selector Switch 3 parts | digital-multimeter-range-selector | 1× | 1 | 3 | assembly |
| 13.4.1 | Selector Knob | digital-multimeter-selector-knob | 1× | 1 | · | part |
| 13.4.2 | Wafer Switch Element | digital-multimeter-selector-wafer | 1× | 1 | · | part |
| 13.4.3 | Detent Spring Mechanism | digital-multimeter-selector-detent | 1× | 1 | · | part |
| 13.5 | LCD Display Module 3 parts | digital-multimeter-display-module | 1× | 1 | 3 | assembly |
| 13.5.1 | LCD Panel | lcd-panel | 1× | 1 | · | part |
| 13.5.2 | LCD Backlight LED | digital-multimeter-display-backlight | 1× | 1 | · | part |
| 13.5.3 | Display Driver | digital-multimeter-display-driver | 1× | 1 | · | part |
| 13.6 | Probe 4 parts | digital-multimeter-probe-set | 2× | 2 | 4 | assembly |
| 13.6.1 | Test Lead Wire | digital-multimeter-probe-lead | 1× | 2 | · | part |
| 13.6.2 | Probe Tip | digital-multimeter-probe-tip | 1× | 2 | · | part |
| 13.6.3 | Banana Plug | digital-multimeter-probe-connector | 1× | 2 | · | part |
| 13.6.4 | Probe Sleeve | digital-multimeter-probe-insulation | 1× | 2 | · | part |
| 13.7 | Battery Holder 3 parts | digital-multimeter-battery-compartment | 1× | 1 | 3 | assembly |
| 13.7.1 | Battery Contact Springs | digital-multimeter-battery-springs | 1× | 1 | · | part |
| 13.7.2 | Battery Clip | digital-multimeter-battery-latch | 1× | 1 | · | part |
| 13.7.3 | Power Switch | digital-multimeter-power-switch | 1× | 1 | · | part |
| 13.8 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 13.9 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 14 | Handheld Label Maker 11 parts | label-maker | 1× | 1 | 54 | product |
| 14.1 | Housing & Covers 4 parts | label-maker-housing | 1× | 1 | 4 | assembly |
| 14.1.1 | Front Shell | label-maker-front-shell | 1× | 1 | · | part |
| 14.1.2 | Back Shell | label-maker-back-shell | 1× | 1 | · | part |
| 14.1.3 | Battery Door | label-maker-battery-door | 1× | 1 | · | part |
| 14.1.4 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 14.2 | Print Mechanism 8 parts | label-maker-print-mechanism | 1× | 1 | 29 | assembly |
| 14.2.1 | Heating Element | heating-element | 1× | 1 | · | part |
| 14.2.2 | Platen Roller | label-maker-platen-roller | 1× | 1 | · | part |
| 14.2.3 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 14.2.4 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 1 | 3 | assembly |
| 14.2.5 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 1 | 19 | assembly |
| 14.2.6 | Helical Gear Pair | gear-pair | 1× | 1 | · | part |
| 14.2.7 | Printhead Frame | label-maker-print-frame | 1× | 1 | · | part |
| 14.2.8 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 14.3 | Tape Cassette Bay 3 parts | label-maker-cassette-bay | 1× | 1 | 3 | assembly |
| 14.3.1 | Tape Cartridge | label-maker-tape-cartridge | 1× | 1 | · | part |
| 14.3.2 | Tape Guides | label-maker-tape-guides | 1× | 1 | · | part |
| 14.3.3 | Tape Sensor | label-maker-tape-sensor | 1× | 1 | · | part |
| 14.4 | Cutter Module 3 parts | label-maker-cutter | 1× | 1 | 3 | assembly |
| 14.4.1 | Cutter Blade | label-maker-cutter-blade | 1× | 1 | · | part |
| 14.4.2 | Cutter Lever | label-maker-cutter-lever | 1× | 1 | · | part |
| 14.4.3 | Coil Spring | coil-spring | 1× | 1 | · | part |
| 14.5 | Keypad Assembly 2 parts | label-maker-keypad | 1× | 1 | 2 | assembly |
| 14.5.1 | Rubber Keypad | label-maker-rubber-keypad | 1× | 1 | · | part |
| 14.5.2 | Key Membrane | label-maker-key-membrane | 1× | 1 | · | part |
| 14.6 | LCD Panel | lcd-panel | 1× | 1 | · | part |
| 14.7 | Main Board 5 parts | label-maker-main-board | 1× | 1 | 6 | assembly |
| 14.7.1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 14.7.2 | Microcontroller | mcu | 1× | 1 | · | part |
| 14.7.3 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 14.7.4 | Flash Memory | label-maker-flash-chip | 1× | 1 | · | part |
| 14.7.5 | Connector | connector | 2× | 2 | · | part |
| 14.8 | Battery Pack 2 parts | label-maker-battery-pack | 1× | 1 | 2 | assembly |
| 14.8.1 | Li-ion Cell, 18650 | li-cell-18650 | 1× | 1 | · | part |
| 14.8.2 | Battery Contacts | label-maker-battery-contacts | 1× | 1 | · | part |
| 14.9 | USB Port 2 parts | label-maker-usb-port | 1× | 1 | 2 | assembly |
| 14.9.1 | USB-C Jack | label-maker-usb-jack | 1× | 1 | · | part |
| 14.9.2 | Connector | connector | 1× | 1 | · | part |
| 14.10 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 14.11 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 15 | Lab Notebook | lab-notebook | 3× | 3 | · | part |
Where the general bench is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |