Operator Cab

Assembly

No photo yet. Seen one of these? Suggest a photo.

ROPS-rated cab with controls, display and climate control.

Direct parts	19
Total parts	663
Used in	1 assembly
Class	Assembly

Report a problem with this BOM

ROPS-rated cab with controls, display and climate control. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.

Operator Cab parts and their functions

19 top-level parts · 663 parts in total · full bill of materials below

Operator Cab parts diagram: 1 ROPS cab frame, 2 seat assembly, 3 pilot joystick, 4 cab monitor, 5 cab HVAC unit, 6 cab glass, 7 cab door, 8 wiper & washer, 9 cab mount, 10 cab interior trim, 11 travel pedal & lever, 12 switch, 13 HVAC duct & vent, 14 seat belt, 15 cab radio, and 4 more. 663 parts in 19 top-level items. — Operator Cab parts diagram. Numbers match the table below; each box is one top-level part or assembly with what it contains.

#	Part	Qty	What it does
1	ROPS Cab Frame	1×	ROPS structure
2	Seat Assembly 5 parts	1×	Suspension seat
3	Pilot Joystick 3 parts	2×	Pilot control levers
4	Cab Monitor 4 parts	1×
5	Cab HVAC Unit 3 parts	1×
6	Cab Glass	6×	Laminated or tempered pane: windshield, door, side, rear or roof window.
7	Cab Door	1×	Framed glazed door with hinges, latch, slide window and lock.
8	Wiper & Washer	2×	upper and lower windshield
9	Cab Mount	4×	Viscous or rubber isolation mount between cab and frame.
10	Cab Interior Trim	14×	Moulded trim panel, headliner or floor mat piece inside the cab.
11	Travel Pedal & Lever	2×	Pilot-operated travel pedal with lever for one track.
12	Switch	24×	Rocker, rotary or key switch on the cab console.
13	HVAC Duct & Vent	6×	Air duct and louvre vent in the cab.
14	Seat Belt	1×	Retractable lap belt on the operator seat.
15	Cab Radio	1×	AM/FM radio with speakers.
16	Sound Insulation Pad	12×	Foam or bitumen pad bonded inside the cab shell.
17	Trim Clip	220×	Plastic fastener for interior trim.
18	Hex Bolt	220×	Flanged hex bolt, M8 to M24, used throughout the structure, covers and equipment mounts.
19	Hex Nut	120×	Flanged or nyloc hex nut mating the bolts.

3D model

No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).

Build & assembly graph

expand / collapse · shared sub-assemblies converge · links to related products · est. labour

product / assembly shared across products atomic part related product

Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.

Bill of materials for Operator Cab

19 top-level lines · 34 rows shown · 663 parts total · indented to 3 levels

#	Item / sub-assembly	Part no.	Qty/assy	Ext. qty	Parts	Type
1	ROPS Cab Frame	excavator-rops-frame	1×	1	·	part
2	Seat Assembly 5 parts	seat-assembly	1×	1	7	assembly
2.1	Seat Frame	seat-frame	1×	1	·	part
2.2	Seat Foam	seat-foam	2×	2	·	part
2.3	Seat Cover	seat-cover	1×	1	·	part
2.4	Seat Motor	seat-motor	2×	2	·	part
2.5	Seat Heater Mat	seat-heater	1×	1	·	part
3	Pilot Joystick 3 parts	excavator-joystick	2×	2	6	assembly
3.1	Joystick Grip	excavator-joystick-grip	1×	2	·	part
3.2	Pilot Control Valve	excavator-pilot-valve	1×	2	·	part
3.3	Control Switch	excavator-control-switches	4×	8	·	part
4	Cab Monitor 4 parts	excavator-monitor	1×	1	7	assembly
4.1	Bare PCB	pcb-bare	1×	1	·	part
4.2	Microcontroller	mcu	1×	1	·	part
4.3	LCD Panel	lcd-panel	1×	1	·	part
4.4	Connector	connector	4×	4	·	part
5	Cab HVAC Unit 3 parts	excavator-hvac	1×	1	3	assembly
5.1	HVAC Blower	excavator-blower	1×	1	·	part
5.2	Heating Element	heating-element	1×	1	·	part
5.3	Cab Air Filter	excavator-cab-filter	1×	1	·	part
6	Cab Glass	excavator-cab-glass	6×	6	·	part
7	Cab Door	excavator-cab-door	1×	1	·	part
8	Wiper & Washer	excavator-wiper	2×	2	·	part
9	Cab Mount	excavator-cab-mount	4×	4	·	part
10	Cab Interior Trim	excavator-interior-trim	14×	14	·	part
11	Travel Pedal & Lever	excavator-travel-pedal	2×	2	·	part
12	Switch	excavator-switch	24×	24	·	part
13	HVAC Duct & Vent	excavator-hvac-duct	6×	6	·	part
14	Seat Belt	excavator-seat-belt	1×	1	·	part
15	Cab Radio	excavator-radio	1×	1	·	part
16	Sound Insulation Pad	excavator-sound-insulation	12×	12	·	part
17	Trim Clip	excavator-trim-clip	220×	220	·	part
18	Hex Bolt	excavator-hex-bolt	220×	220	·	part
19	Hex Nut	excavator-hex-nut	120×	120	·	part

Something wrong in this list? Report a problem with this BOM.

Where the operator cab is used

1 product across 1 domain contain it, directly or inside a sub-assembly

Construction & Earthmoving 1 Excavator

Used in 1 assembly

Excavator

Sourcing: possible vendors

Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work

Vendor	HQ	Specialty	MOQ	Lead time
🇨🇳Foxconn foxconn.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Flex (Singapore) flex.com ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks
🇮🇳Dixon Technologies dixoninfo.com ↗	Noida, IN	Electronics contract mfg	1,000 pcs	6–10 wks
🇨🇳BYD Electronics bydelectronic.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Venture Corp venture.com.sg ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks