Hydropneumatic Suspension
AssemblyFour nitrogen-over-oil suspension struts, two front and two rear, absorbing haul-road shock and limiting frame loads. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Hydropneumatic Suspension parts and their functions
5 top-level parts · 16 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Front Suspension Strut | 2× | Front king-pin suspension struts that also act as the steering pivots |
| 2 | Rear Suspension Strut | 2× | Rear suspension struts between axle housing and frame |
| 3 | Strut Charge Valve | 4× | Nitrogen charge and bleed valves on each strut |
| 4 | Pressure Sensor | 4× | Strut pressure sensors feeding the payload system |
| 5 | O-Ring Set | 4× | High-pressure seal kits for the struts |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model — STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Hydropneumatic Suspension
5 top-level lines · 5 rows shown · 16 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Front Suspension Strut | rigid-haul-truck-front-strut | 2× | 2 | · | part |
| 2 | Rear Suspension Strut | rigid-haul-truck-rear-strut | 2× | 2 | · | part |
| 3 | Strut Charge Valve | rigid-haul-truck-charge-valve | 4× | 4 | · | part |
| 4 | Pressure Sensor | pressure-sensor | 4× | 4 | · | part |
| 5 | O-Ring Set | oring-set | 4× | 4 | · | part |
Where the hydropneumatic suspension is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.10–$20. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| gabrielindia.com ↗ | Pune, IN | Shock absorbers & dampers | 2,000 pcs | 5–8 wks |
| jaiparabolic.com ↗ | Yamunanagar, IN | Leaf & parabolic springs | 2,000 pcs | 5–8 wks |
| munjalshowa.net ↗ | Gurugram, IN | Shock absorbers & struts | 2,000 pcs | 5–8 wks |
| sokonindustry.com ↗ | Chongqing, CN | Springs & auto parts | 2,000 pcs | 5–8 wks |
| nrbbearings.com ↗ | Mumbai, IN | Needle & auto bearings | 2,000 pcs | 5–8 wks |