UHT Sterilizer
AssemblyHeats product to 135-150 C for a few seconds to commercially sterilize it, then cools it before filling. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for UHT Sterilizer
8 top-level lines as of r6501| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Plate Heat Exchanger 4 parts | aseptic-filling-line-plate-heat-exchanger | 2× | 2 | 0 | assembly |
| 2 | Holding Tube | aseptic-filling-line-holding-tube | 1× | 1 | · | part |
| 3 | Cooling Section 3 parts | aseptic-filling-line-cooling-section | 1× | 1 | 0 | assembly |
| 4 | Product Feed Pump 5 parts | aseptic-filling-line-feed-pump | 1× | 1 | 0 | assembly |
| 5 | Aseptic Booster Pump 6 parts | aseptic-filling-line-booster-pump | 1× | 1 | 0 | assembly |
| 6 | Steam Injection Head | aseptic-filling-line-steam-injector | 1× | 1 | · | part |
| 7 | Pressure Sensor | pressure-sensor | 3× | 3 | · | part |
| 8 | RTD Temperature Probe | aseptic-filling-line-rtd-probe | 4× | 4 | · | part |