Application System
AssemblyLays a thin, even film of slurry onto the hot drum. This double-drum machine uses a nip between the two drums fed from a trough; smaller spreader rolls control the film thickness, which fixes the drying capacity. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Application System
5 top-level lines as of r50977| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Feed Trough | ddm-feed-trough | 1× | 1 | · | part |
| 2 | Spreader Roll | ddm-spreader-roll | 2× | 2 | · | part |
| 3 | Slurry Feed Pump 5 parts | ddm-feed-pump | 1× | 1 | 0 | assembly |
| 4 | Nip Adjuster 3 parts | ddm-nip-adjuster | 1× | 1 | 0 | assembly |
| 5 | Trough Agitator | ddm-agitator | 1× | 1 | · | part |