Air Handling Unit
AssemblyConditions the inlet air: it is filtered for cleanliness, heated to the drying temperature, and often dehumidified so the drying rate is steady regardless of the outside weather. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Air Handling Unit
5 top-level lines as of r66893| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Inlet Filter Bank | fbd-inlet-filter | 1× | 1 | · | part |
| 2 | Air Heater 3 parts | fbd-air-heater | 1× | 1 | 0 | assembly |
| 3 | Dehumidifier Coil | fbd-dehumidifier | 1× | 1 | · | part |
| 4 | Inlet Damper | fbd-inlet-damper | 1× | 1 | · | part |
| 5 | Temperature Sensor | temperature-sensor | 3× | 3 | · | part |