CO2 Saturation and Pressure-Test Module
AssemblySystem injecting CO2 into filled keg and pressure-testing at 2.5 bar (typical) before discharge. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for CO2 Saturation and Pressure-Test Module
4 top-level lines as of r93460| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | CO2 Pressure Regulator | keg-racking-machine-gas-regulator | 1× | 1 | · | part |
| 2 | CO2 Injection Solenoid Valve | keg-racking-machine-gas-solenoid | 1× | 1 | · | part |
| 3 | Electronic Pressure Test Gauge | keg-racking-machine-pressure-test-gauge | 1× | 1 | · | part |
| 4 | Overpressure Relief Valve | keg-racking-machine-gas-relief | 1× | 1 | · | part |