Post-Sterilization Cooling System
AssemblyOverhead water spray or immersion cooling chamber reducing can temperature from 212–275 °F to 100–110 °F over 10–30 minutes, minimizing thermal shock. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Post-Sterilization Cooling System
5 top-level lines as of r140964| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Cooling Water Pump | retort-autoclave-canning-cooling-pump | 1× | 1 | · | part |
| 2 | Spray Nozzles | retort-autoclave-canning-spray-nozzles-cooling | 1× | 1 | · | part |
| 3 | Drain Trough | retort-autoclave-canning-drain-trough | 1× | 1 | · | part |
| 4 | Thermostatic Mixing Valve | retort-autoclave-canning-thermostat-valve | 1× | 1 | · | part |
| 5 | Immersion Cooling Basin | retort-autoclave-canning-cooling-basin | 1× | 1 | · | part |