Inspection and Diversion Unit
AssemblyOptical sensors check each cup for blood, rot or shell, then divert rejects. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Inspection and Diversion Unit
8 top-level lines as of r53687| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Blood and Rot Optical Sensor | egg-breaking-line-blood-sensor | 36× | 36 | · | part |
| 2 | Cup Divert Valve | egg-breaking-line-divert-valve | 36× | 36 | · | part |
| 3 | Reject Trough | egg-breaking-line-reject-trough | 1× | 1 | · | part |
| 4 | Bare PCB | pcb-bare | 4× | 4 | · | part |
| 5 | Microcontroller | mcu | 4× | 4 | · | part |
| 6 | SMD Passive (R/C/L) | smd-passives | 4× | 4 | · | part |
| 7 | Connector | connector | 8× | 8 | · | part |
| 8 | Wire Bundle | wire-bundle | 1× | 1 | · | part |