Frame and Keg Cradle
AssemblyStainless 304 welded frame carrying the keg cradle, the inversion station that turns the keg neck-down over the head, and the lift that presses the keg onto the coupling. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Frame and Keg Cradle
8 top-level lines as of r93378| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Base Frame Weldment | keg-filling-machine-base-frame | 1× | 1 | · | part |
| 2 | Keg Cradle Saddle | keg-filling-machine-keg-cradle | 1× | 1 | · | part |
| 3 | Inversion Station Arm | keg-filling-machine-inversion-arm | 1× | 1 | · | part |
| 4 | Clamp Lift Cylinder | keg-filling-machine-lift-cylinder | 1× | 1 | · | part |
| 5 | Keg Presence Sensor | keg-filling-machine-presence-sensor | 1× | 1 | · | part |
| 6 | Interlocked Guard Panel | keg-filling-machine-guard-panel | 4× | 4 | · | part |
| 7 | Linear Guide Rail | linear-guide | 2× | 2 | · | part |
| 8 | Fastener Set | fastener-set | 1× | 1 | · | part |