Media Cylinders
AssemblyThe two opposed cylinders, each with a hydraulic piston, that push the abrasive media up through the work and then receive it on the way back; one full up-and-down counts as a cycle. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Media Cylinders
6 top-level lines as of r387| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Upper Media Cylinder | afm-upper-cylinder | 1× | 1 | · | part |
| 2 | Lower Media Cylinder | afm-lower-cylinder | 1× | 1 | · | part |
| 3 | Media Piston | afm-media-piston | 2× | 2 | · | part |
| 4 | Piston Seal | afm-piston-seal | 4× | 4 | · | part |
| 5 | Pressure Sensor | pressure-sensor | 2× | 2 | · | part |
| 6 | Abrasive Media | afm-media-charge | 1× | 1 | · | part |