Motion Controller
AssemblyCNC that coordinates spindle speeds and the two feed axes so both ends are faced and centre-drilled in one timed cycle. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Motion Controller
4 top-level lines as of r26609| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 2 | Microcontroller | mcu | 2× | 2 | · | part |
| 3 | SMD Passive (R/C/L) | smd-passives | 200× | 200 | · | part |
| 4 | Connector | connector | 30× | 30 | · | part |