Control Cabinet
AssemblyElectrical cabinet with the PLC, drives, and operator station that sets blow energy, sequences lift and sync, and times the die spray. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control Cabinet
11 top-level lines as of r38964| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | PLC Control | counterblow-hammer-plc | 1× | 1 | · | part |
| 2 | Operator HMI | counterblow-hammer-hmi | 1× | 1 | · | part |
| 3 | Blow Energy Controller | counterblow-hammer-blow-controller | 1× | 1 | · | part |
| 4 | Power Supply | power-supply | 1× | 1 | · | part |
| 5 | Relay | relay | 6× | 6 | · | part |
| 6 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 7 | Microcontroller | mcu | 1× | 1 | · | part |
| 8 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 9 | Connector | connector | 8× | 8 | · | part |
| 10 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 11 | LCD Panel | lcd-panel | 1× | 1 | · | part |