High-Pressure Flushing System
AssemblyPump unit forcing dielectric through the 0.1-3 mm electrode bore at 70-150 bar to flush eroded debris up the annular gap and cool the spark zone. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for High-Pressure Flushing System
8 top-level lines as of r53444| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | High-Pressure Plunger Pump | edh-hp-pump | 1× | 1 | · | part |
| 2 | Flushing Pump Motor | edh-pump-motor | 1× | 1 | · | part |
| 3 | Pressure Regulator | edh-pressure-regulator | 1× | 1 | · | part |
| 4 | Pulsation Accumulator | edh-pressure-accumulator | 1× | 1 | · | part |
| 5 | Pre-Pump Filter | edh-flush-filter | 1× | 1 | · | part |
| 6 | Pressure Sensor | pressure-sensor | 2× | 2 | · | part |
| 7 | High-Pressure Hose | edh-hp-hose | 2× | 2 | · | part |
| 8 | O-Ring Set | oring-set | 1× | 1 | · | part |