CNC Controller
AssemblyCoordinates spindle speed, stroke and feed, sets the crosshatch angle and stops on the gauge signal. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for CNC Controller
4 top-level lines as of r83385| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 2 | Microcontroller | mcu | 1× | 1 | · | part |
| 3 | Relay | relay | 6× | 6 | · | part |
| 4 | SMD Passive (R/C/L) | smd-passives | 140× | 140 | · | part |