Control System
AssemblyThe PLC, servo drives, die protection, and guarding that synchronize feed, press, and die and stop a crash before it wrecks the tool. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control System
11 top-level lines as of r105498| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Line PLC | metal-stamping-line-plc | 1× | 1 | · | part |
| 2 | Press Control | metal-stamping-line-press-control | 1× | 1 | · | part |
| 3 | Servo Drive | metal-stamping-line-servo-drive | 3× | 3 | · | part |
| 4 | Die Protection 4 parts | metal-stamping-line-die-protection | 1× | 1 | 0 | assembly |
| 5 | Tonnage Monitor | metal-stamping-line-tonnage-monitor | 1× | 1 | · | part |
| 6 | Light Curtain | metal-stamping-line-light-curtain | 2× | 2 | · | part |
| 7 | Operator HMI | metal-stamping-line-hmi | 1× | 1 | · | part |
| 8 | Power Supply | power-supply | 1× | 1 | · | part |
| 9 | Relay | relay | 8× | 8 | · | part |
| 10 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 11 | Connector | connector | 16× | 16 | · | part |