NC Control
AssemblySets and holds roll positions and feed speed so the plate rolls to a target radius. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
NC Control parts and their functions
10 top-level parts · 30 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Control Unit | 1× | NC controller |
| 2 | LCD Panel | 1× | Operator screen |
| 3 | Power Supply | 1× | Unit that converts mains or battery input into the regulated DC voltages a machine's electronics and actuators need. |
| 4 | Bare PCB | 1× | Unpopulated printed circuit board: copper traces etched on an FR-4 glass-epoxy laminate that carry current between the components later soldered to it. |
| 5 | Microcontroller | 1× | Single-chip microcontroller combining a processor core, flash memory, RAM, and peripherals such as timers, ADCs, and serial ports to run the device's control firmware. |
| 6 | SMD Passive (R/C/L) | 1× | Surface-mount resistors, capacitors, and inductors, typically in 0402 to 1206 packages, that set voltages, filter noise, and time signals on a circuit board. |
| 7 | Relay | 8× | Electromechanical switch in which a small coil current closes or opens contacts rated for a much larger load, isolating control circuits from what they switch. |
| 8 | Operator Pendant | 1× | Mobile pendant |
| 9 | Wire Bundle | 1× | Group of insulated conductors cut to length, terminated, and bound together to carry power and signals between the assemblies of a machine. |
| 10 | Connector | 14× | Mating plug-and-socket pair that joins two lengths of wiring or a cable to a board so a circuit can be assembled, serviced, and separated without soldering. |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model — STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for NC Control
10 top-level lines · 10 rows shown · 30 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Control Unit | plate-rolling-machine-control-unit | 1× | 1 | · | part |
| 2 | LCD Panel | lcd-panel | 1× | 1 | · | part |
| 3 | Power Supply | power-supply | 1× | 1 | · | part |
| 4 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 5 | Microcontroller | mcu | 1× | 1 | · | part |
| 6 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 7 | Relay | relay | 8× | 8 | · | part |
| 8 | Operator Pendant | plate-rolling-machine-pendant | 1× | 1 | · | part |
| 9 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 10 | Connector | connector | 14× | 14 | · | part |
Where the NC control is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |