Forging Box
AssemblyCentral housing that carries the four hammers and their dies around the work axis; the hammers strike inward in short fast strokes up to about 1000 strokes per minute, reducing the round section while the workpiece rotates and feeds through. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Forging Box
9 top-level lines as of r135926| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Forging Hammer | radial-forging-machine-hammer | 4× | 4 | · | part |
| 2 | Forging Die | radial-forging-machine-die | 4× | 4 | · | part |
| 3 | Die Saddle | radial-forging-machine-die-saddle | 4× | 4 | · | part |
| 4 | Adjusting Wedge | radial-forging-machine-adjusting-wedge | 4× | 4 | · | part |
| 5 | Forging Box Housing | radial-forging-machine-box-housing | 1× | 1 | · | part |
| 6 | Hammer Guide Block | radial-forging-machine-guide-block | 4× | 4 | · | part |
| 7 | Die Clamp | radial-forging-machine-die-clamp | 4× | 4 | · | part |
| 8 | Oil Seal | oil-seal | 8× | 8 | · | part |
| 9 | Fastener Set | fastener-set | 1× | 1 | · | part |