Pressure Pot
AssemblyASME-coded pressure vessel that fills with media then pushes it into the air stream. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Pressure Pot
9 top-level lines as of r148686| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Pot Vessel Body | sandblasting-machine-industrial-pot-vessel | 1× | 1 | · | part |
| 2 | Pop-Up Valve | sandblasting-machine-industrial-popup-valve | 1× | 1 | · | part |
| 3 | Coil Spring | coil-spring | 1× | 1 | · | part |
| 4 | Fill / Exhaust Valve | sandblasting-machine-industrial-fill-valve | 1× | 1 | · | part |
| 5 | Safety Relief Valve | sandblasting-machine-industrial-relief-valve | 1× | 1 | · | part |
| 6 | Fill Screen | sandblasting-machine-industrial-pot-screen | 1× | 1 | · | part |
| 7 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |
| 8 | O-Ring Set | oring-set | 1× | 1 | · | part |
| 9 | Fastener Set | fastener-set | 1× | 1 | · | part |