Die Space and Ejector
AssemblyBolster, lower die holder, and ejector in the bed; the ejector lifts the forged part off the lower die after the blow so it can be removed without prying, which protects the die impression. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Die Space and Ejector
6 top-level lines as of r150287| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Bolster | screw-press-forging-bolster | 1× | 1 | · | part |
| 2 | Lower Die Holder | screw-press-forging-lower-die-holder | 1× | 1 | · | part |
| 3 | Ejector Pin | screw-press-forging-ejector-pin | 4× | 4 | · | part |
| 4 | Ejector Cylinder | screw-press-forging-ejector-cylinder | 1× | 1 | · | part |
| 5 | Die Block | screw-press-forging-die-block | 2× | 2 | · | part |
| 6 | Die Clamp | screw-press-forging-die-clamp | 4× | 4 | · | part |