Control Panel
AssemblyEnclosure holding the PLC, HMI, motor starters and ammeter that sequence the load, blast, recovery and unload steps and watch the wheel current as a proxy for shot flow. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control Panel
8 top-level lines as of r154430| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Panel Enclosure | shot-blast-tumble-machine-enclosure | 1× | 1 | · | part |
| 2 | PLC 4 parts | shot-blast-tumble-machine-plc | 1× | 1 | · | part |
| 3 | HMI Screen 3 parts | shot-blast-tumble-machine-hmi | 1× | 1 | · | part |
| 4 | Wheel Soft Starter 3 parts | shot-blast-tumble-machine-wheel-starter | 1× | 1 | · | part |
| 5 | Power Supply | power-supply | 1× | 1 | · | part |
| 6 | Relay | relay | 8× | 8 | · | part |
| 7 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 8 | Emergency Stop | shot-blast-tumble-machine-estop | 2× | 2 | · | part |