Wet Skin-Pass & Surface System
AssemblyApplies a thin skin-pass solution into the roll bite for wet passes, then wrings and dries the strip. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Wet Skin-Pass & Surface System
8 top-level lines as of r156599| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Solution Tank | skin-pass-mill-solution-tank | 1× | 1 | · | part |
| 2 | Solution Pump | skin-pass-mill-solution-pump | 1× | 1 | · | part |
| 3 | Applicator Header | skin-pass-mill-applicator-header | 2× | 2 | · | part |
| 4 | Spray Nozzle | skin-pass-mill-spray-nozzle | 16× | 16 | · | part |
| 5 | Wringer / Squeegee Roll | skin-pass-mill-wringer-roll | 2× | 2 | · | part |
| 6 | Blow-Off / Drying Header | skin-pass-mill-blowoff-header | 1× | 1 | · | part |
| 7 | Solution Filter | skin-pass-mill-solution-filter | 2× | 2 | · | part |
| 8 | Roll-Cleaning Brush | skin-pass-mill-cleaning-brush | 2× | 2 | · | part |