BOMwiki the bill-of-materials encyclopedia
30,441,950 parts mapped · 192,925 items

This page is machine-generated and unverified (what this means). Treat details as provisional. If you know this hardware, weigh in or correct it directly with Edit.

Discussion History

Motion Controller

Assembly

Controller running the programmed slide profile and coordinating servo, feed and cushion. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.

Motion Controller parts and their functions

5 top-level parts · 193 parts in total · full bill of materials below
Motion Controller parts diagram: 1 bare PCB, 2 microcontroller, 3 relay, 4 CAN transceiver, 5 SMD passive (R/C/L). 193 parts in 5 assemblies.
Motion Controller parts diagram. Numbers match the table below; each box is one top-level part or assembly with what it contains.
#PartQtyWhat it does
1 Bare PCB 1× Unpopulated printed circuit board: copper traces etched on an FR-4 glass-epoxy laminate that carry current between the components later soldered to it.
2 Microcontroller 2× Single-chip microcontroller combining a processor core, flash memory, RAM, and peripherals such as timers, ADCs, and serial ports to run the device's control firmware.
3 Relay 8× Electromechanical switch in which a small coil current closes or opens contacts rated for a much larger load, isolating control circuits from what they switch.
4 CAN Transceiver 2× Interface chip that converts a controller's logic signals to the differential CAN bus levels and back, letting control units talk to each other.
5 SMD Passive (R/C/L) 180× Surface-mount resistors, capacitors, and inductors, typically in 0402 to 1206 packages, that set voltages, filter noise, and time signals on a circuit board.

3D model

No 3D model yet. Have a CAD file of this? Add a 3D model — STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).

Build & assembly graph

expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly shared across products atomic part related product

Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.

Bill of materials for Motion Controller

5 top-level lines · 5 rows shown · 193 parts total · indented to 3 levels
# Item / sub-assembly Part no. Qty/assy Ext. qty Parts Type
1 Bare PCB pcb-bare 1× 1 · part
2 Microcontroller mcu 2× 2 · part
3 Relay relay 8× 8 · part
4 CAN Transceiver can-transceiver 2× 2 · part
5 SMD Passive (R/C/L) smd-passives 180× 180 · part

Where the motion controller is used

1 product across 1 domain contain it, directly or inside a sub-assembly

Used in 1 assembly

Control System

Sourcing: possible vendors

Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $1–$200. How estimates work
VendorHQSpecialtyMOQLead time
🇨🇳JLCPCB
jlcpcb.com ↗ 		Shenzhen, CN PCB fabrication 100 pcs 2–4 wks
🇨🇳PCBWay
pcbway.com ↗ 		Shenzhen, CN PCB fab & assembly 100 pcs 2–4 wks
🇨🇳Shennan Circuits
scc.com.cn ↗ 		Shenzhen, CN PCB manufacturer 100 pcs 2–4 wks
🇮🇳Shogini Technoarts
shogini.com ↗ 		Mumbai, IN PCB manufacturer 100 pcs 2–4 wks
🇸🇬Venture Corp
venture.com.sg ↗ 		Singapore Electronics contract mfg 100 pcs 2–4 wks