Temper Solution System
AssemblyApplies and removes a thin temper solution that controls friction and texture transfer in wet temper rolling. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Temper Solution System
8 top-level lines as of r170999| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Solution Tank | temper-mill-solution-tank | 1× | 1 | · | part |
| 2 | Solution Pump 4 parts | temper-mill-solution-pump | 1× | 1 | 0 | assembly |
| 3 | Applicator Header | temper-mill-applicator-header | 2× | 2 | · | part |
| 4 | Spray Nozzle | temper-mill-spray-nozzle | 16× | 16 | · | part |
| 5 | Wringer Roll 2 parts | temper-mill-wringer-roll | 2× | 2 | 0 | assembly |
| 6 | Solution Filter | temper-mill-solution-filter | 2× | 2 | · | part |
| 7 | Blow-off Header | temper-mill-blowoff-header | 1× | 1 | · | part |
| 8 | Roll Cleaning Brush | temper-mill-cleaning-brush | 2× | 2 | · | part |