Lubrication System
AssemblyAutomatic system feeding metered oil or grease to the crankshaft bearings, gibs, and connecting-rod joint, and spraying die lubricant onto the trim edges between strokes to ease the push-through and hold die temperature down. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Lubrication System
5 top-level lines as of r176981| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Lube Pump | trim-press-lube-pump | 1× | 1 | · | part |
| 2 | Distributor Block | trim-press-lube-distributor | 1× | 1 | · | part |
| 3 | Die Spray Nozzle | trim-press-die-spray | 2× | 2 | · | part |
| 4 | Lubricant Reservoir | trim-press-lube-tank | 1× | 1 | · | part |
| 5 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |