Slide and Guides
AssemblyReciprocating ram that carries the upper punch and is held square to the bed by gibs along the column faces; accurate guiding keeps the punch centred in the trim die so the shear is even all round the flash line. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Slide and Guides
8 top-level lines as of r176954| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Slide Body | trim-press-slide-body | 1× | 1 | · | part |
| 2 | Guide Gib | trim-press-gib | 4× | 4 | · | part |
| 3 | Overload Protector | trim-press-overload-cylinder | 1× | 1 | · | part |
| 4 | Counterbalance Cylinder | trim-press-counterbalance | 2× | 2 | · | part |
| 5 | Shut Height Screw | trim-press-shut-height-screw | 1× | 1 | · | part |
| 6 | Punch Holder | trim-press-punch-holder | 1× | 1 | · | part |
| 7 | Linear Guide Rail | linear-guide | 2× | 2 | · | part |
| 8 | Oil Seal | oil-seal | 4× | 4 | · | part |