Dielectric System
AssemblyConditions the deionized water that fills the cut: it filters eroded particles, runs water through ion-exchange resin to hold resistivity steady, and chills it to keep the cut dimensionally stable. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Dielectric System
7 top-level lines as of r53550| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Dielectric Pump | wedm-dielectric-pump | 2× | 2 | · | part |
| 2 | Deionizer Resin Bottle | wedm-deionizer-bottle | 1× | 1 | · | part |
| 3 | Particle Filter | wedm-particle-filter | 2× | 2 | · | part |
| 4 | Resistivity Sensor | wedm-resistivity-sensor | 1× | 1 | · | part |
| 5 | Dielectric Chiller | wedm-dielectric-chiller | 1× | 1 | · | part |
| 6 | Clean Water Tank | wedm-clean-tank | 1× | 1 | · | part |
| 7 | Dirty Water Tank | wedm-dirty-tank | 1× | 1 | · | part |