Synchronizing Mechanism
AssemblySystem tying the two rams so they travel equal and opposite distances and meet exactly at the work centerline; steel bands over pulleys or a hydraulic coupling keep the masses matched blow to blow. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Synchronizing Mechanism
8 top-level lines as of r38927| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Synchronizing Band | counterblow-hammer-sync-band | 4× | 4 | · | part |
| 2 | Band Pulley | counterblow-hammer-band-pulley | 4× | 4 | · | part |
| 3 | Band Clamp | counterblow-hammer-band-clamp | 8× | 8 | · | part |
| 4 | Coupling Cylinder | counterblow-hammer-sync-cylinder | 2× | 2 | · | part |
| 5 | Balance Valve | counterblow-hammer-balance-valve | 1× | 1 | · | part |
| 6 | Ball Bearing | ball-bearing | 8× | 8 | · | part |
| 7 | Oil Seal | oil-seal | 4× | 4 | · | part |
| 8 | Pressure Sensor | pressure-sensor | 2× | 2 | · | part |