Roll Stand

Assembly

No photo yet. Seen one of these? Suggest a photo.

Pair of horizontal roll shafts carrying the segmental dies; the rolls counter-rotate so the gripped billet end is drawn through the closing gap and reduced in section pass after pass.

Direct parts	8
Total parts	30
Used in	1 assembly
Class	Assembly
Status	unverified

Pair of horizontal roll shafts carrying the segmental dies; the rolls counter-rotate so the gripped billet end is drawn through the closing gap and reduced in section pass after pass. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.

Roll Stand parts and their functions

8 top-level parts · 30 parts in total · full bill of materials below

Roll Stand parts diagram: 1 roll shaft, 2 die segment, 3 die clamp, 4 stand housing, 5 screw-down unit, 6 thrust block, 7 ball bearing, 8 oil seal. 30 parts in 8 assemblies. — Roll Stand parts diagram. Numbers match the table below; each box is one top-level part or assembly with what it contains.

#	Part	Qty	What it does
1	Roll Shaft	2×	Upper and lower roll shafts
2	Die Segment	4×	Shaped die segments per groove
3	Die Clamp	4×	Die segment clamps
4	Stand Housing	2×	Stand housings
5	Screw-Down Unit	2×	Roll-gap screw-down units
6	Thrust Block	2×	Axial thrust blocks
7	Ball Bearing	8×	Roll neck bearings
8	Oil Seal	6×	Roll neck seals

3D model

No 3D model yet. Have a CAD file of this? Add a 3D model — STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).

Build & assembly graph

expand / collapse · shared sub-assemblies converge · links to related products · est. labour

product / assembly shared across products atomic part related product

Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.

Bill of materials for Roll Stand

8 top-level lines · 8 rows shown · 30 parts total · indented to 3 levels

#	Item / sub-assembly	Part no.	Qty/assy	Ext. qty	Parts	Type
1	Roll Shaft	forging-roll-machine-roll-shaft	2×	2	·	part
2	Die Segment	forging-roll-machine-die-segment	4×	4	·	part
3	Die Clamp	forging-roll-machine-die-clamp	4×	4	·	part
4	Stand Housing	forging-roll-machine-stand-housing	2×	2	·	part
5	Screw-Down Unit	forging-roll-machine-screw-down	2×	2	·	part
6	Thrust Block	forging-roll-machine-thrust-block	2×	2	·	part
7	Ball Bearing	ball-bearing	8×	8	·	part
8	Oil Seal	oil-seal	6×	6	·	part

Where the roll stand is used

1 product across 1 domain contain it, directly or inside a sub-assembly

Machine Tools & Metalworking 1 Forging Roll Machine

Used in 1 assembly

Forging Roll Machine

Sourcing: possible vendors

Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work

Vendor	HQ	Specialty	MOQ	Lead time
🇨🇳Foxconn foxconn.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Flex (Singapore) flex.com ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks
🇮🇳Dixon Technologies dixoninfo.com ↗	Noida, IN	Electronics contract mfg	1,000 pcs	6–10 wks
🇨🇳BYD Electronics bydelectronic.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Venture Corp venture.com.sg ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks