Chuck Head
AssemblyOne of two heads that grip, rotate, and feed the bar through the forging box; the infeed head pushes the workpiece in while both heads rotate it in step so the dies forge a clean round, and a stepped feed-and-index cycle works the whole length. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Chuck Head
14 top-level lines as of r135942| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Gripping Chuck | radial-forging-machine-chuck | 1× | 1 | · | part |
| 2 | Chuck Cylinder | radial-forging-machine-chuck-cylinder | 1× | 1 | · | part |
| 3 | Rotary Drive | radial-forging-machine-rotary-drive | 1× | 1 | · | part |
| 4 | Work Spindle | radial-forging-machine-spindle | 1× | 1 | · | part |
| 5 | Axial Feed Unit | radial-forging-machine-axial-feed | 1× | 1 | · | part |
| 6 | Feed Carriage | radial-forging-machine-feed-carriage | 1× | 1 | · | part |
| 7 | Chuck Jaw | radial-forging-machine-chuck-jaw | 3× | 3 | · | part |
| 8 | Rotary Union | radial-forging-machine-rotary-union | 1× | 1 | · | part |
| 9 | Ball Screw | ball-screw | 1× | 1 | · | part |
| 10 | Linear Guide Rail | linear-guide | 2× | 2 | · | part |
| 11 | Servo Motor 4 parts | servo-motor | 2× | 2 | 0 | assembly |
| 12 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 13 | Encoder | encoder | 2× | 2 | · | part |
| 14 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |