Lead Draw Press
AssemblyThe large first press whose slide drives the draw die that forms the flat blank into a deep panel shape. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Lead Draw Press parts and their functions
7 top-level parts · 149 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Crown | 1× | Crown |
| 2 | Upright | 4× | Uprights and tie rods |
| 3 | Press Bed | 1× | Press bed |
| 4 | Slide 4 parts | 1× | Slide |
| 5 | Mechanical Drive 6 parts | 1× | Mechanical drive |
| 6 | Die Cushion 4 parts | 2× | Hydraulic die cushions |
| 7 | Moving Bolster | 2× | Moving bolsters |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Lead Draw Press
7 top-level lines · 33 rows shown · 149 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Crown | tandem-press-line-press-crown | 1× | 1 | · | part |
| 2 | Upright | tandem-press-line-press-upright | 4× | 4 | · | part |
| 3 | Press Bed | tandem-press-line-press-bed | 1× | 1 | · | part |
| 4 | Slide 4 parts | tandem-press-line-press-slide | 1× | 1 | 17 | assembly |
| 4.1 | Slide Body | tandem-press-line-slide-body | 1× | 1 | · | part |
| 4.2 | Slide Gib | tandem-press-line-gib | 8× | 8 | · | part |
| 4.3 | Connecting Rod | tandem-press-line-connecting-rod | 4× | 4 | · | part |
| 4.4 | Overload Protector | tandem-press-line-overload-cylinder | 4× | 4 | · | part |
| 5 | Mechanical Drive 6 parts | tandem-press-line-press-drive | 1× | 1 | 42 | assembly |
| 5.1 | Flywheel | tandem-press-line-flywheel | 1× | 1 | · | part |
| 5.2 | Clutch-brake | tandem-press-line-clutch-brake | 1× | 1 | · | part |
| 5.3 | Eccentric Shaft | tandem-press-line-eccentric-shaft | 1× | 1 | · | part |
| 5.4 | Drive Gearbox 4 parts | tandem-press-line-drive-gearbox | 1× | 1 | 9 | assembly |
| 5.4.1 | Helical Gear Pair | gear-pair | 2× | 2 | · | part |
| 5.4.2 | Gearbox Housing | gearbox-housing | 1× | 1 | · | part |
| 5.4.3 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 5.4.4 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 5.5 | Servo Motor 4 parts | servo-motor | 1× | 1 | 24 | assembly |
| 5.5.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 1 | 3 | assembly |
| 5.5.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 1 | 19 | assembly |
| 5.5.3 | Encoder | encoder | 1× | 1 | · | part |
| 5.5.4 | Motor Housing | motor-housing | 1× | 1 | · | part |
| 5.6 | Drive Belt | drive-belt | 6× | 6 | · | part |
| 6 | Die Cushion 4 parts | tandem-press-line-die-cushion | 2× | 2 | 41 | assembly |
| 6.1 | Cushion Cylinder | tandem-press-line-cushion-cylinder | 4× | 8 | · | part |
| 6.2 | Cushion Pin | tandem-press-line-cushion-pin | 24× | 48 | · | part |
| 6.3 | Hydraulic Pack 4 parts | tandem-press-line-hydraulic-pack | 1× | 2 | 9 | assembly |
| 6.3.1 | Hydraulic Pump | tandem-press-line-hydraulic-pump | 2× | 4 | · | part |
| 6.3.2 | Accumulator | tandem-press-line-accumulator | 2× | 4 | · | part |
| 6.3.3 | Proportional Valve | tandem-press-line-proportional-valve | 4× | 8 | · | part |
| 6.3.4 | O-Ring Set | oring-set | 1× | 2 | · | part |
| 6.4 | Pressure Sensor | pressure-sensor | 4× | 8 | · | part |
| 7 | Moving Bolster | tandem-press-line-moving-bolster | 2× | 2 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the lead draw press is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |