Die Heating System
AssemblyElectric band heaters that hold the die at 250–350 °C so surface lignin plasticizes. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Die Heating System
6 top-level lines as of r18885| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Heating Element | heating-element | 3× | 3 | · | part |
| 2 | Heater Band Clamp | briquette-press-heater-clamp | 3× | 3 | · | part |
| 3 | Thermal Fuse | thermal-fuse | 1× | 1 | · | part |
| 4 | Relay | relay | 2× | 2 | · | part |
| 5 | Heat Shield | briquette-press-heat-shield | 1× | 1 | · | part |
| 6 | Wire Bundle | wire-bundle | 1× | 1 | · | part |