Electrodeposition Dip Tank
AssemblyMain e-coat tank where charged parts attract paint solids out of the bath; holds anolyte cells and membranes. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Electrodeposition Dip Tank
9 top-level lines as of r52483| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Process Tank Shell | e-coat-line-tank-shell | 1× | 1 | · | part |
| 2 | Anolyte Cell 4 parts | e-coat-line-anolyte-cell | 24× | 24 | 0 | assembly |
| 3 | Anode Ion-Exchange Membrane | e-coat-line-anode-membrane | 24× | 24 | · | part |
| 4 | Anode Electrode | e-coat-line-electrode | 24× | 24 | · | part |
| 5 | DC Busbar | e-coat-line-busbar | 4× | 4 | · | part |
| 6 | Bath Overflow Weir | e-coat-line-overflow-weir | 2× | 2 | · | part |
| 7 | Bath Heat Exchanger | e-coat-line-tank-heat-exchanger | 2× | 2 | · | part |
| 8 | Anolyte Cell Fitting | e-coat-line-anolyte-cell-feed | 24× | 24 | · | part |
| 9 | Pressure Sensor | pressure-sensor | 2× | 2 | · | part |