Resin Bath & Immersion
AssemblyHeated tank (40–70°C) containing epoxy, polyester, or vinyl-ester resin, into which all fibers pass before winding on the mandrel. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Resin Bath & Immersion
6 top-level lines as of r62867| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Resin Tank | filament-winding-machine-resin-tank | 1× | 1 | · | part |
| 2 | Resin Heater | filament-winding-machine-resin-heater | 1× | 1 | · | part |
| 3 | Resin Circulation Pump | filament-winding-machine-resin-pump | 1× | 1 | · | part |
| 4 | Nip Roller | filament-winding-machine-resin-nip-roller | 2× | 2 | · | part |
| 5 | Resin Filter | filament-winding-machine-resin-filter | 1× | 1 | · | part |
| 6 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |