Part Ejection System
AssemblyThe air blow and ejector pins that release the molded foam part from the open cavity. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Part Ejection System
4 top-level lines as of r67474| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Ejector Plate | foam-molding-machine-ejector-plate | 1× | 1 | · | part |
| 2 | Ejector Pin | foam-molding-machine-ejector-pin | 8× | 8 | · | part |
| 3 | Air Blow Valve | foam-molding-machine-blow-valve | 4× | 4 | · | part |
| 4 | Coil Spring | coil-spring | 4× | 4 | · | part |