Blow Station
AssemblyHeated mold cavity and compressed air system that inflates the preform to final container shape. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Blow Station
5 top-level lines as of r90093| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Blow Mold Cavity | injection-blow-molder-blow-mold | 1× | 1 | · | part |
| 2 | Blow Air Valve | injection-blow-molder-blow-air-valve | 1× | 1 | · | part |
| 3 | Air Manifold | injection-blow-molder-blow-manifold | 1× | 1 | · | part |
| 4 | Mold Heater | injection-blow-molder-oven-heater | 1× | 1 | · | part |
| 5 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |