Pneumatic Test Panel
AssemblyThe block of valves, the regulator, and the reference volume that fill the part, isolate it, hold it, then exhaust it. The valve sequence sets pressures and timing. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Pneumatic Test Panel
10 top-level lines as of r97308| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Valve Manifold Block | leak-testing-machine-manifold-block | 1× | 1 | · | part |
| 2 | Pressure Regulator | leak-testing-machine-regulator | 1× | 1 | · | part |
| 3 | Proportional Fill Valve | leak-testing-machine-prop-valve | 1× | 1 | · | part |
| 4 | Fill Isolation Valve | leak-testing-machine-fill-valve | 1× | 1 | · | part |
| 5 | Test Isolation Valve | leak-testing-machine-test-valve | 1× | 1 | · | part |
| 6 | Exhaust Valve | leak-testing-machine-exhaust-valve | 1× | 1 | · | part |
| 7 | Reference Volume | leak-testing-machine-reference-volume | 1× | 1 | · | part |
| 8 | Inlet Filter Regulator | leak-testing-machine-filter-reg | 1× | 1 | · | part |
| 9 | Air Fitting | leak-testing-machine-air-fitting | 12× | 12 | · | part |
| 10 | Air Tubing Set | leak-testing-machine-air-tubing | 1× | 1 | · | part |