Control System
AssemblyPID controller, touchscreen, and power contactors running the setpoint loop. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control System
11 top-level lines as of r110197| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | PID Controller | mold-temperature-controller-pid | 1× | 1 | · | part |
| 2 | LCD Panel | lcd-panel | 1× | 1 | · | part |
| 3 | Heater Contactor | mold-temperature-controller-heater-contactor | 1× | 1 | · | part |
| 4 | Solid-State Relay | mold-temperature-controller-ssr | 1× | 1 | · | part |
| 5 | Power Supply | power-supply | 1× | 1 | · | part |
| 6 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 7 | Microcontroller | mcu | 1× | 1 | · | part |
| 8 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 9 | Relay | relay | 3× | 3 | · | part |
| 10 | Connector | connector | 1× | 1 | · | part |
| 11 | Wire Bundle | wire-bundle | 1× | 1 | · | part |