Vacuum Pump System
AssemblyRotary vane or screw pump drawing 0.5–1.5 bar vacuum through the porous table, holding prepreg plies in place during manipulation. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Vacuum Pump System
6 top-level lines as of r132661| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Vacuum Pump | prepreg-layup-table-vacuum-pump | 1× | 1 | · | part |
| 2 | Pump Motor | prepreg-layup-table-pump-motor | 1× | 1 | · | part |
| 3 | Vacuum Reservoir | prepreg-layup-table-vacuum-reservoir | 1× | 1 | · | part |
| 4 | Vacuum Filter | prepreg-layup-table-vacuum-filter | 1× | 1 | · | part |
| 5 | Vacuum Regulator | prepreg-layup-table-vacuum-regulator | 1× | 1 | · | part |
| 6 | Vacuum Gauge | prepreg-layup-table-vacuum-gauge | 1× | 1 | · | part |