Single-Screw Extruder
AssemblyMelts and meters the resin into a steady high-pressure stream for the flat die. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Single-Screw Extruder parts and their functions
9 top-level parts · 65 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Feed Hopper 3 parts | 1× | Resin hopper |
| 2 | Extruder Barrel | 1× | Bimetallic barrel |
| 3 | Extruder Screw | 1× | Mixing screw |
| 4 | Band Heater | 6× | Band heaters |
| 5 | Thermocouple | 6× | Zone thermocouples |
| 6 | Reduction Gearbox 4 parts | 1× | Reduction gearbox |
| 7 | AC Drive Motor 5 parts | 1× | AC drive motor |
| 8 | Screen Changer 3 parts | 1× | Continuous screen changer |
| 9 | Melt Pump 4 parts | 1× | Gear melt pump |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Single-Screw Extruder
9 top-level lines · 35 rows shown · 65 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Feed Hopper 3 parts | cfl-feed-hopper | 1× | 1 | 3 | assembly |
| 1.1 | Hopper Cone | cfl-hopper-cone | 1× | 1 | · | part |
| 1.2 | Gravimetric Doser | cfl-gravimetric-doser | 1× | 1 | · | part |
| 1.3 | Feed Throat | cfl-feed-throat | 1× | 1 | · | part |
| 2 | Extruder Barrel | cfl-barrel | 1× | 1 | · | part |
| 3 | Extruder Screw | cfl-screw | 1× | 1 | · | part |
| 4 | Band Heater | cfl-barrel-heater | 6× | 6 | · | part |
| 5 | Thermocouple | cfl-thermocouple | 6× | 6 | · | part |
| 6 | Reduction Gearbox 4 parts | cfl-gearbox | 1× | 1 | 9 | assembly |
| 6.1 | Helical Gear Pair | gear-pair | 2× | 2 | · | part |
| 6.2 | Gearbox Housing | gearbox-housing | 1× | 1 | · | part |
| 6.3 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 6.4 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 7 | AC Drive Motor 5 parts | cfl-drive-motor | 1× | 1 | 26 | assembly |
| 7.1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 7.1.1 | Stator Core (laminations) | stator-core | 1× | 1 | · | part |
| 7.1.2 | Copper Winding | copper-winding | 1× | 1 | · | part |
| 7.1.3 | Slot Insulation | stator-insulation | 1× | 1 | · | part |
| 7.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 7.2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | · | part |
| 7.2.2 | Rotor Core | rotor-core | 1× | 1 | · | part |
| 7.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | · | part |
| 7.2.4 | Ball Bearing | ball-bearing | 1× | 1 | · | part |
| 7.3 | Motor Housing | motor-housing | 1× | 1 | · | part |
| 7.4 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 7.5 | Encoder | encoder | 1× | 1 | · | part |
| 8 | Screen Changer 3 parts | cfl-screen-changer | 1× | 1 | 7 | assembly |
| 8.1 | Breaker Plate | cfl-breaker-plate | 1× | 1 | · | part |
| 8.2 | Filter Screen | cfl-filter-screen | 4× | 4 | · | part |
| 8.3 | Changer Piston | cfl-changer-piston | 2× | 2 | · | part |
| 9 | Melt Pump 4 parts | cfl-melt-pump | 1× | 1 | 6 | assembly |
| 9.1 | Helical Gear Pair | gear-pair | 1× | 1 | · | part |
| 9.2 | Gearbox Housing | gearbox-housing | 1× | 1 | · | part |
| 9.3 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 9.4 | Oil Seal | oil-seal | 2× | 2 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the single-screw extruder is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.01–$2. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| sundram.com ↗ | Chennai, IN | Fasteners | 10,000 pcs | 3–5 wks |
| lpsindia.com ↗ | Rohtak, IN | Fasteners | 10,000 pcs | 3–5 wks |
| escort-fastener.com ↗ | Suzhou, CN | Fasteners | 10,000 pcs | 3–5 wks |
| tbfastener.com ↗ | Shanghai, CN | Fasteners | 10,000 pcs | 3–5 wks |
| sterlingtools.in ↗ | Faridabad, IN | Fasteners | 10,000 pcs | 3–5 wks |