Coater Section
AssemblyApplies primer on one pass and topcoat on the next using three-roll coaters, with paint circulated and metered so the wet film thickness stays uniform across the width and along the coil. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Coater Section parts and their functions
5 top-level parts · 224 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Prime Coater 6 parts | 1× | Roll coater applying the primer |
| 2 | Finish Coater 6 parts | 1× | Roll coater applying the finish coat |
| 3 | Backside Coater 5 parts | 1× | Reverse-side backer coater |
| 4 | Paint Supply Skid 5 parts | 1× | Paint circulation and pumping skid |
| 5 | Coater Bridle 4 parts | 1× | Bridle stabilizing strip through the coaters |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Coater Section
5 top-level lines · 60 rows shown · 224 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Prime Coater 6 parts | coil-coating-line-prime-coater | 1× | 1 | 59 | assembly |
| 1.1 | Pick-up Roll | coil-coating-line-pickup-roll | 1× | 1 | · | part |
| 1.2 | Applicator Roll | coil-coating-line-applicator-roll | 1× | 1 | · | part |
| 1.3 | Coater Backup Roll | coil-coating-line-backup-roll | 1× | 1 | · | part |
| 1.4 | Coater Head Actuator | coil-coating-line-coater-head-actuator | 2× | 2 | · | part |
| 1.5 | Servo Motor 4 parts | servo-motor | 2× | 2 | 24 | assembly |
| 1.5.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 2 | 3 | assembly |
| 1.5.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 2 | 19 | assembly |
| 1.5.3 | Encoder | encoder | 1× | 2 | · | part |
| 1.5.4 | Motor Housing | motor-housing | 1× | 2 | · | part |
| 1.6 | Ball Bearing | ball-bearing | 6× | 6 | · | part |
| 2 | Finish Coater 6 parts | coil-coating-line-finish-coater | 1× | 1 | 59 | assembly |
| 2.1 | Pick-up Roll | coil-coating-line-pickup-roll | 1× | 1 | · | part |
| 2.2 | Applicator Roll | coil-coating-line-applicator-roll | 1× | 1 | · | part |
| 2.3 | Coater Backup Roll | coil-coating-line-backup-roll | 1× | 1 | · | part |
| 2.4 | Coater Head Actuator | coil-coating-line-coater-head-actuator | 2× | 2 | · | part |
| 2.5 | Servo Motor 4 parts | servo-motor | 2× | 2 | 24 | assembly |
| 2.5.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 2 | 3 | assembly |
| 2.5.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 2 | 19 | assembly |
| 2.5.3 | Encoder | encoder | 1× | 2 | · | part |
| 2.5.4 | Motor Housing | motor-housing | 1× | 2 | · | part |
| 2.6 | Ball Bearing | ball-bearing | 6× | 6 | · | part |
| 3 | Backside Coater 5 parts | coil-coating-line-backside-coater | 1× | 1 | 31 | assembly |
| 3.1 | Pick-up Roll | coil-coating-line-pickup-roll | 1× | 1 | · | part |
| 3.2 | Applicator Roll | coil-coating-line-applicator-roll | 1× | 1 | · | part |
| 3.3 | Coater Backup Roll | coil-coating-line-backup-roll | 1× | 1 | · | part |
| 3.4 | Servo Motor 4 parts | servo-motor | 1× | 1 | 24 | assembly |
| 3.4.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 1 | 3 | assembly |
| 3.4.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 1 | 19 | assembly |
| 3.4.3 | Encoder | encoder | 1× | 1 | · | part |
| 3.4.4 | Motor Housing | motor-housing | 1× | 1 | · | part |
| 3.5 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 4 | Paint Supply Skid 5 parts | coil-coating-line-paint-supply | 1× | 1 | 24 | assembly |
| 4.1 | Paint Circulation Pump 3 parts | coil-coating-line-paint-pump | 3× | 3 | 5 | assembly |
| 4.1.1 | Pneumatic Cylinder | pneumatic-cylinder | 2× | 6 | · | part |
| 4.1.2 | O-Ring Set | oring-set | 1× | 3 | · | part |
| 4.1.3 | Pump Diaphragm | coil-coating-line-pump-diaphragm | 2× | 6 | · | part |
| 4.2 | Paint Filter | coil-coating-line-paint-filter | 2× | 2 | · | part |
| 4.3 | Viscosity Meter 3 parts | coil-coating-line-viscosity-meter | 1× | 1 | 3 | assembly |
| 4.3.1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 4.3.2 | Microcontroller | mcu | 1× | 1 | · | part |
| 4.3.3 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 4.4 | Paint Heater | coil-coating-line-paint-heater | 1× | 1 | · | part |
| 4.5 | Pressure Sensor | pressure-sensor | 3× | 3 | · | part |
| 5 | Coater Bridle 4 parts | coil-coating-line-coater-bridle | 1× | 1 | 51 | assembly |
| 5.1 | Bridle Roll | coil-coating-line-bridle-roll | 2× | 2 | · | part |
| 5.2 | Bridle Bearing Block 3 parts | coil-coating-line-bridle-bearing-block | 4× | 4 | 4 | assembly |
| 5.2.1 | Ball Bearing | ball-bearing | 1× | 4 | · | part |
| 5.2.2 | Oil Seal | oil-seal | 2× | 8 | · | part |
| 5.2.3 | Fastener Set | fastener-set | 1× | 4 | · | part |
| 5.3 | Helical Gearbox 4 parts | gearbox | 1× | 1 | 9 | assembly |
| 5.3.1 | Helical Gear Pair | gear-pair | 2× | 2 | · | part |
| 5.3.2 | Gearbox Housing | gearbox-housing | 1× | 1 | · | part |
| 5.3.3 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 5.3.4 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 5.4 | Servo Motor 4 parts | servo-motor | 1× | 1 | 24 | assembly |
| 5.4.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 1 | 3 | assembly |
| 5.4.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 1 | 19 | assembly |
| 5.4.3 | Encoder | encoder | 1× | 1 | · | part |
| 5.4.4 | Motor Housing | motor-housing | 1× | 1 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the coater section is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |