Cleaning Section
AssemblyStrips mill oil, iron fines and dirt off the surface so zinc can wet the bare steel. Runs alkaline degrease, brush scrubbing, rinse and drying in sequence. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Cleaning Section parts and their functions
5 top-level parts · 162 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Degrease Tank 4 parts | 1× | Alkaline spray and dip degreasing |
| 2 | Brush Scrubber 4 parts | 2× | Rotating brush rolls scrubbing the surface |
| 3 | Rinse Tank 3 parts | 1× | Cascade water rinse removing alkali |
| 4 | Wringer Roll | 2× | Wringer rolls stripping carry-over liquid |
| 5 | Strip Dryer 3 parts | 1× | Hot-air dryer leaving the strip dry |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model — STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Cleaning Section
5 top-level lines · 31 rows shown · 162 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Degrease Tank 4 parts | galvanizing-line-degrease-tank | 1× | 1 | 34 | assembly |
| 1.1 | Process Tank Shell | galvanizing-line-tank-shell | 1× | 1 | · | part |
| 1.2 | Spray Header | galvanizing-line-spray-header | 4× | 4 | · | part |
| 1.3 | Recirculation Pump 3 parts | galvanizing-line-recirc-pump | 1× | 1 | 27 | assembly |
| 1.3.1 | Servo Motor 4 parts + deeper › | servo-motor | 1× | 1 | 24 | assembly |
| 1.3.2 | O-Ring Set | oring-set | 1× | 1 | · | part |
| 1.3.3 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 1.4 | Heating Element | heating-element | 2× | 2 | · | part |
| 2 | Brush Scrubber 4 parts | galvanizing-line-brush-scrubber | 2× | 2 | 32 | assembly |
| 2.1 | Brush Roll | galvanizing-line-brush-roll | 2× | 4 | · | part |
| 2.2 | Servo Motor 4 parts | servo-motor | 1× | 2 | 24 | assembly |
| 2.2.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 2 | 3 | assembly |
| 2.2.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 2 | 19 | assembly |
| 2.2.3 | Encoder | encoder | 1× | 2 | · | part |
| 2.2.4 | Motor Housing | motor-housing | 1× | 2 | · | part |
| 2.3 | Ball Bearing | ball-bearing | 4× | 8 | · | part |
| 2.4 | Brush Arbor | galvanizing-line-brush-arbor | 2× | 4 | · | part |
| 3 | Rinse Tank 3 parts | galvanizing-line-rinse-tank | 1× | 1 | 30 | assembly |
| 3.1 | Process Tank Shell | galvanizing-line-tank-shell | 1× | 1 | · | part |
| 3.2 | Spray Header | galvanizing-line-spray-header | 2× | 2 | · | part |
| 3.3 | Recirculation Pump 3 parts | galvanizing-line-recirc-pump | 1× | 1 | 27 | assembly |
| 3.3.1 | Servo Motor 4 parts + deeper › | servo-motor | 1× | 1 | 24 | assembly |
| 3.3.2 | O-Ring Set | oring-set | 1× | 1 | · | part |
| 3.3.3 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 4 | Wringer Roll | galvanizing-line-squeegee-roll | 2× | 2 | · | part |
| 5 | Strip Dryer 3 parts | galvanizing-line-strip-dryer | 1× | 1 | 32 | assembly |
| 5.1 | Dryer Blower 2 parts | galvanizing-line-dryer-blower | 1× | 1 | 26 | assembly |
| 5.1.1 | Servo Motor 4 parts + deeper › | servo-motor | 1× | 1 | 24 | assembly |
| 5.1.2 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 5.2 | Heating Element | heating-element | 2× | 2 | · | part |
| 5.3 | Drying Air Nozzle | galvanizing-line-air-nozzle | 4× | 4 | · | part |
Where the cleaning section is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |