Zinc Pot Section
AssemblyThe molten zinc bath held near 460 C. The strip dips in through the snout, turns on the sink roll and rises out coated. Pot rolls and induction heating keep the bath at temperature and the strip on a stable path. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Zinc Pot Section parts and their functions
7 top-level parts · 53 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Zinc Pot Vessel 3 parts | 1× | Refractory-lined zinc bath vessel |
| 2 | Channel Induction Heater 4 parts | 1× | Channel induction heater holding bath heat |
| 3 | Sink Roll 3 parts | 1× | Immersed roll turning the strip upward |
| 4 | Stabilizer Roll | 2× | Rolls steadying the strip leaving the bath |
| 5 | Pot Roll Support Arm 3 parts | 1× | Arms and bearings supporting the immersed rolls |
| 6 | Dross Skimmer 3 parts | 1× | Skimmer removing dross from the bath surface |
| 7 | Zinc Ingot Feeder | 1× | Feeder adding zinc ingots to the bath |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Zinc Pot Section
7 top-level lines · 31 rows shown · 53 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Zinc Pot Vessel 3 parts | galvanizing-line-pot-vessel | 1× | 1 | 3 | assembly |
| 1.1 | Pot Refractory Liner | galvanizing-line-pot-liner | 1× | 1 | · | part |
| 1.2 | Pot Steel Shell | galvanizing-line-pot-shell | 1× | 1 | · | part |
| 1.3 | Pot Insulation | galvanizing-line-pot-insulation | 1× | 1 | · | part |
| 2 | Channel Induction Heater 4 parts | galvanizing-line-induction-heater | 1× | 1 | 4 | assembly |
| 2.1 | Induction Coil | galvanizing-line-induction-coil | 1× | 1 | · | part |
| 2.2 | Inductor Channel Block | galvanizing-line-inductor-channel | 1× | 1 | · | part |
| 2.3 | Power Supply | power-supply | 1× | 1 | · | part |
| 2.4 | Inductor Cooling Unit | galvanizing-line-induction-cooling | 1× | 1 | · | part |
| 3 | Sink Roll 3 parts | galvanizing-line-sink-roll | 1× | 1 | 5 | assembly |
| 3.1 | Sink Roll Body | galvanizing-line-sink-roll-body | 1× | 1 | · | part |
| 3.2 | Pot Roll Bearing | galvanizing-line-pot-bearing | 2× | 2 | · | part |
| 3.3 | Pot Roll Journal | galvanizing-line-roll-journal | 2× | 2 | · | part |
| 4 | Stabilizer Roll | galvanizing-line-stabilizer-roll | 2× | 2 | · | part |
| 5 | Pot Roll Support Arm 3 parts | galvanizing-line-pot-roll-arm | 1× | 1 | 4 | assembly |
| 5.1 | Pot Support Frame | galvanizing-line-support-frame | 1× | 1 | · | part |
| 5.2 | Roll Arm Cylinder | galvanizing-line-arm-cylinder | 2× | 2 | · | part |
| 5.3 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 6 | Dross Skimmer 3 parts | galvanizing-line-dross-skimmer | 1× | 1 | 34 | assembly |
| 6.1 | Skimmer Paddle | galvanizing-line-skimmer-paddle | 1× | 1 | · | part |
| 6.2 | Servo Motor 4 parts | servo-motor | 1× | 1 | 24 | assembly |
| 6.2.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 1 | 3 | assembly |
| 6.2.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 1 | 19 | assembly |
| 6.2.3 | Encoder | encoder | 1× | 1 | · | part |
| 6.2.4 | Motor Housing | motor-housing | 1× | 1 | · | part |
| 6.3 | Helical Gearbox 4 parts | gearbox | 1× | 1 | 9 | assembly |
| 6.3.1 | Helical Gear Pair | gear-pair | 2× | 2 | · | part |
| 6.3.2 | Gearbox Housing | gearbox-housing | 1× | 1 | · | part |
| 6.3.3 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 6.3.4 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 7 | Zinc Ingot Feeder | galvanizing-line-ingot-feeder | 1× | 1 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the zinc pot section is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |