Zinc Pot Section
AssemblyThe molten zinc bath held near 460 C. The strip dips in through the snout, turns on the sink roll and rises out coated. Pot rolls and induction heating keep the bath at temperature and the strip on a stable path. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Zinc Pot Section
7 top-level lines as of r71442| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Zinc Pot Vessel 3 parts | galvanizing-line-pot-vessel | 1× | 1 | 0 | assembly |
| 2 | Channel Induction Heater 4 parts | galvanizing-line-induction-heater | 1× | 1 | 0 | assembly |
| 3 | Sink Roll 3 parts | galvanizing-line-sink-roll | 1× | 1 | 0 | assembly |
| 4 | Stabilizer Roll | galvanizing-line-stabilizer-roll | 2× | 2 | · | part |
| 5 | Pot Roll Support Arm 3 parts | galvanizing-line-pot-roll-arm | 1× | 1 | 0 | assembly |
| 6 | Dross Skimmer 3 parts | galvanizing-line-dross-skimmer | 1× | 1 | 0 | assembly |
| 7 | Zinc Ingot Feeder | galvanizing-line-ingot-feeder | 1× | 1 | · | part |