Pickling Section
AssemblyThe chain of shallow turbulent hydrochloric acid tanks where the scale is dissolved. The strip is held just under the surface and the acid is pumped across it at high flow so fresh acid constantly reaches the metal; each tank is rubber and brick lined to survive hot HCl. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Pickling Section parts and their functions
6 top-level parts · 214 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Pickling Tank 3 parts | 4× | Rubber and brick lined cascade tanks |
| 2 | Tank Cover 3 parts | 4× | Sealed covers containing acid fumes |
| 3 | Submerged Roll 3 parts | 8× | Submerged rolls holding strip in the bath |
| 4 | Turbulence Nozzle Header 3 parts | 1× | Nozzle headers driving acid flow |
| 5 | Bath Heater 3 parts | 4× | Tank heating via heat exchanger |
| 6 | Pickling Bridle 4 parts | 2× | Bridles spanning the pickling tanks |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Pickling Section
6 top-level lines · 36 rows shown · 214 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Pickling Tank 3 parts | pickling-line-pickle-tank | 4× | 4 | 3 | assembly |
| 1.1 | Tank Shell | pickling-line-tank-shell | 1× | 4 | · | part |
| 1.2 | Acid-Resistant Lining | pickling-line-tank-lining | 1× | 4 | · | part |
| 1.3 | Cascade Overflow Weir | pickling-line-overflow-weir | 1× | 4 | · | part |
| 2 | Tank Cover 3 parts | pickling-line-tank-cover | 4× | 4 | 6 | assembly |
| 2.1 | Cover Panel | pickling-line-cover-panel | 4× | 16 | · | part |
| 2.2 | Cover Seal Strip | pickling-line-cover-seal | 1× | 4 | · | part |
| 2.3 | Fastener Set | fastener-set | 1× | 4 | · | part |
| 3 | Submerged Roll 3 parts | pickling-line-submerged-roll | 8× | 8 | 4 | assembly |
| 3.1 | Rubber-Covered Roll Body | pickling-line-rubber-roll-body | 1× | 8 | · | part |
| 3.2 | Acid-Service Bearing | pickling-line-acid-bearing | 2× | 16 | · | part |
| 3.3 | O-Ring Set | oring-set | 1× | 8 | · | part |
| 4 | Turbulence Nozzle Header 3 parts | pickling-line-turbulence-nozzle | 1× | 1 | 14 | assembly |
| 4.1 | Acid Spray Nozzle | pickling-line-nozzle | 12× | 12 | · | part |
| 4.2 | Acid Flow Header | pickling-line-flow-header | 1× | 1 | · | part |
| 4.3 | O-Ring Set | oring-set | 1× | 1 | · | part |
| 5 | Bath Heater 3 parts | pickling-line-bath-heater | 4× | 4 | 3 | assembly |
| 5.1 | Bath Heat Exchanger | pickling-line-heat-exchanger | 1× | 4 | · | part |
| 5.2 | Pressure Sensor | pressure-sensor | 1× | 4 | · | part |
| 5.3 | Bath Temperature Sensor | pickling-line-temp-sensor | 1× | 4 | · | part |
| 6 | Pickling Bridle 4 parts | pickling-line-pickle-bridle | 2× | 2 | 60 | assembly |
| 6.1 | Bridle Roll | pickling-line-bridle-roll | 3× | 6 | · | part |
| 6.2 | Bridle Bearing Block 3 parts | pickling-line-bridle-bearing-block | 6× | 12 | 4 | assembly |
| 6.2.1 | Ball Bearing | ball-bearing | 1× | 12 | · | part |
| 6.2.2 | Oil Seal | oil-seal | 2× | 24 | · | part |
| 6.2.3 | Fastener Set | fastener-set | 1× | 12 | · | part |
| 6.3 | Helical Gearbox 4 parts | gearbox | 1× | 2 | 9 | assembly |
| 6.3.1 | Helical Gear Pair | gear-pair | 2× | 4 | · | part |
| 6.3.2 | Gearbox Housing | gearbox-housing | 1× | 2 | · | part |
| 6.3.3 | Ball Bearing | ball-bearing | 4× | 8 | · | part |
| 6.3.4 | Oil Seal | oil-seal | 2× | 4 | · | part |
| 6.4 | Servo Motor 4 parts | servo-motor | 1× | 2 | 24 | assembly |
| 6.4.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 2 | 3 | assembly |
| 6.4.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 2 | 19 | assembly |
| 6.4.3 | Encoder | encoder | 1× | 2 | · | part |
| 6.4.4 | Motor Housing | motor-housing | 1× | 2 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the pickling section is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |