Rinse Section
AssemblyRemoves residual acid and iron salts from the strip with a counter-flow cascade of rinse tanks, squeezes the surface dry with wringer rolls between stages and finishes with a hot-air dryer so the strip leaves clean and dry. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Rinse Section parts and their functions
5 top-level parts · 131 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Rinse Tank 3 parts | 3× | Counter-flow cascade rinse tanks |
| 2 | Wringer Roll Pair 3 parts | 4× | Squeegee rolls between rinse stages |
| 3 | Rinse Spray Header | 1× | Spray rinse headers |
| 4 | Hot Air Dryer 3 parts | 1× | Hot-air strip dryer |
| 5 | Rinse Bridle 4 parts | 1× | Bridle through the rinse stages |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Rinse Section
5 top-level lines · 32 rows shown · 131 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Rinse Tank 3 parts | pickling-line-rinse-tank | 3× | 3 | 10 | assembly |
| 1.1 | Tank Shell | pickling-line-tank-shell | 1× | 3 | · | part |
| 1.2 | Cascade Overflow Weir | pickling-line-overflow-weir | 1× | 3 | · | part |
| 1.3 | Submerged Roll 3 parts | pickling-line-submerged-roll | 2× | 6 | 4 | assembly |
| 1.3.1 | Rubber-Covered Roll Body | pickling-line-rubber-roll-body | 1× | 6 | · | part |
| 1.3.2 | Acid-Service Bearing | pickling-line-acid-bearing | 2× | 12 | · | part |
| 1.3.3 | O-Ring Set | oring-set | 1× | 6 | · | part |
| 2 | Wringer Roll Pair 3 parts | pickling-line-wringer-roll | 4× | 4 | 8 | assembly |
| 2.1 | Squeegee Roll | pickling-line-squeegee-roll | 2× | 8 | · | part |
| 2.2 | Pneumatic Cylinder | pneumatic-cylinder | 2× | 8 | · | part |
| 2.3 | Ball Bearing | ball-bearing | 4× | 16 | · | part |
| 3 | Rinse Spray Header | pickling-line-rinse-nozzle | 1× | 1 | · | part |
| 4 | Hot Air Dryer 3 parts | pickling-line-dryer | 1× | 1 | 8 | assembly |
| 4.1 | Dryer Blower | pickling-line-dryer-blower | 2× | 2 | · | part |
| 4.2 | Heating Element | heating-element | 4× | 4 | · | part |
| 4.3 | Air Knife | pickling-line-air-knife | 2× | 2 | · | part |
| 5 | Rinse Bridle 4 parts | pickling-line-rinse-bridle | 1× | 1 | 60 | assembly |
| 5.1 | Bridle Roll | pickling-line-bridle-roll | 3× | 3 | · | part |
| 5.2 | Bridle Bearing Block 3 parts | pickling-line-bridle-bearing-block | 6× | 6 | 4 | assembly |
| 5.2.1 | Ball Bearing | ball-bearing | 1× | 6 | · | part |
| 5.2.2 | Oil Seal | oil-seal | 2× | 12 | · | part |
| 5.2.3 | Fastener Set | fastener-set | 1× | 6 | · | part |
| 5.3 | Helical Gearbox 4 parts | gearbox | 1× | 1 | 9 | assembly |
| 5.3.1 | Helical Gear Pair | gear-pair | 2× | 2 | · | part |
| 5.3.2 | Gearbox Housing | gearbox-housing | 1× | 1 | · | part |
| 5.3.3 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 5.3.4 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 5.4 | Servo Motor 4 parts | servo-motor | 1× | 1 | 24 | assembly |
| 5.4.1 | Stator Assembly 3 parts + deeper › | stator-assembly | 1× | 1 | 3 | assembly |
| 5.4.2 | Rotor Assembly 4 parts + deeper › | rotor-assembly | 1× | 1 | 19 | assembly |
| 5.4.3 | Encoder | encoder | 1× | 1 | · | part |
| 5.4.4 | Motor Housing | motor-housing | 1× | 1 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the rinse section is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |