Dry-Off Oven
AssemblyConvection oven that flashes off rinse water so parts enter the booth dry. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Dry-Off Oven parts and their functions
7 top-level parts · 251 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Insulated Oven Panel 3 parts | 28× | Insulated wall panels |
| 2 | Gas Burner 4 parts | 1× | Gas burner |
| 3 | Heat Exchanger | 1× | Indirect heat exchanger |
| 4 | Recirculation Fan 7 parts | 2× | Recirculation fans |
| 5 | Supply Ductwork | 1× | Hot air ductwork |
| 6 | Oven Door | 2× | Entry and exit doors |
| 7 | Pressure Sensor | 2× | Temperature probes |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Dry-Off Oven
7 top-level lines · 33 rows shown · 251 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Insulated Oven Panel 3 parts | powder-coating-line-oven-panel | 28× | 28 | 4 | assembly |
| 1.1 | Sheet Metal Panel | sheet-panel | 2× | 56 | · | part |
| 1.2 | Mineral Wool Core | powder-coating-line-mineral-wool | 1× | 28 | · | part |
| 1.3 | Fastener Set | fastener-set | 1× | 28 | · | part |
| 2 | Gas Burner 4 parts | powder-coating-line-burner | 1× | 1 | 77 | assembly |
| 2.1 | Burner Body | powder-coating-line-burner-body | 1× | 1 | · | part |
| 2.2 | Gas Valve Train | powder-coating-line-gas-train | 1× | 1 | · | part |
| 2.3 | Flame Sensing Rod | powder-coating-line-flame-rod | 1× | 1 | · | part |
| 2.4 | Ignition Controller 5 parts | powder-coating-line-ignition-board | 1× | 1 | 74 | assembly |
| 2.4.1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 2.4.2 | Microcontroller | mcu | 1× | 1 | · | part |
| 2.4.3 | Relay | relay | 4× | 4 | · | part |
| 2.4.4 | SMD Passive (R/C/L) | smd-passives | 60× | 60 | · | part |
| 2.4.5 | Connector | connector | 8× | 8 | · | part |
| 3 | Heat Exchanger | powder-coating-line-heat-exchanger | 1× | 1 | · | part |
| 4 | Recirculation Fan 7 parts | powder-coating-line-recirc-fan | 2× | 2 | 28 | assembly |
| 4.1 | Fan Wheel | powder-coating-line-fan-wheel | 1× | 2 | · | part |
| 4.2 | Fan Housing | powder-coating-line-fan-housing | 1× | 2 | · | part |
| 4.3 | Stator Assembly 3 parts | stator-assembly | 1× | 2 | 3 | assembly |
| 4.3.1 | Stator Core (laminations) | stator-core | 1× | 2 | · | part |
| 4.3.2 | Copper Winding | copper-winding | 1× | 2 | · | part |
| 4.3.3 | Slot Insulation | stator-insulation | 1× | 2 | · | part |
| 4.4 | Rotor Assembly 4 parts | rotor-assembly | 1× | 2 | 19 | assembly |
| 4.4.1 | Rotor Shaft | rotor-shaft | 1× | 2 | · | part |
| 4.4.2 | Rotor Core | rotor-core | 1× | 2 | · | part |
| 4.4.3 | Neodymium Magnet | neodymium-magnet | 16× | 32 | · | part |
| 4.4.4 | Ball Bearing | ball-bearing | 1× | 2 | · | part |
| 4.5 | Ball Bearing | ball-bearing | 2× | 4 | · | part |
| 4.6 | Drive Belt | drive-belt | 1× | 2 | · | part |
| 4.7 | Fastener Set | fastener-set | 1× | 2 | · | part |
| 5 | Supply Ductwork | powder-coating-line-supply-duct | 1× | 1 | · | part |
| 6 | Oven Door | powder-coating-line-oven-door | 2× | 2 | · | part |
| 7 | Pressure Sensor | pressure-sensor | 2× | 2 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the dry-off oven is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |